Olympus DS-2400 Power Supply, Turning On the Power, Turning Off the Power, Power Save Mode (Power Save), POWER/HOLD, POWER/HOLD, Power Save Setting

1

Supply/Power Power

Mode Save

Power Supply

When the recorder is not being used, turn the power off to reduce battery consumption to a minimum. Even if the power is turned off, existing data, mode settings, and clock settings will be maintained.

Turning On the Power

While the recorder’s power is off, slide the POWER/HOLD switch in the direction indicated by the arrow.

The display will turn on, and after [System Check] appears, the power will be turned on. The resume function will bring the recorder back to the stop position in memory before power was turned off.

Turning Off the Power

Slide the POWER/HOLD switch in the direction indicated by the arrow for 0.5 seconds or longer.

The display shuts off and the power will be turned off. The resume function remembers the stop position before the power is turned off.

Power Save Mode (Power Save)

When the recorder is ON but not in use for 10 minutes, by default, it will switch to power save mode automatically. To reactivate the recorder again, operate any button or the slide switch.

Power Save Setting

You can set the time to enter Power Save mode from among [5 minutes. ], [10 minutes.], [30 minutes.], [1 hour], and [Off]. To exit power save, press any button.

The [Power Save] setting can be changed from the Menu. For more details, refer to “Menu List” (☞ P.33) and “Learning to Use the Menu” (☞ P.35).

Power Save

5minutes

10minutes

30minutes

1hour Off

BACKEXIT

14