Setting Time and Date (Time & Date)

1

Time Setting Date and

•You can choose the order of the year, month, day by pressing the F2(D/M/Y or Y/M/D or M/ D/Y)* button while setting them.

Example: October 14, 2008

(Initial setting)

 

 

 

 

 

 

10M 14D 2008Y

 

 

 

 

 

 

 

 

 

 

14D 10M 2008Y

 

 

 

 

 

 

2008Y 10M 14D

 

 

 

 

 

*The display will vary depending on the status of the settings.

3

Press the PLAY/OK button to complete

the setup screen.

The clock will start from the set date and time. Press the PLAY/OK button according to the time signal.

Notes

•If you press the STOP button during the setup operation, the settings are cancelled, and the recorder returns to the previous screen.

•You can set the time and date from your PC using DSS Player software (☞ P.50).

Changing the Time and Date

When the recorder’s POWER/HOLD switch is turned ON the [Time & Date] will be displayed for two seconds. If the time and date is not correct, set it using the procedure below.

1 Press the + or – button in the [Device Menu] screen, then select [Time & Date].

See P.34 regarding the menu.

Device Menu

Beep

Power Save

Time & Date

USB12 Class

Reset Settings

Format

BACKEXIT

2 Press the PLAY/OK or 9 button. The time and date screen appears. The hour indicator flashes, indicating the start of the time and date setup process.The following steps are the same as Step 1 through Step 3 of “Setting Time and Date (Time & Date)” (☞ P.17).

3 Press the F3(EXIT) or 0 button to complete the setting.

18