2

1

Hook

Connecting to your PC using the cradle

Place the recorder on the cradle1Insert end A of the USB cable to your PC's USB port or USB hub.2Connect the end b of the USB cable to the cradle.3Make sure that the recorder is off, and place it in the cradle.

When you place the recorder on the cradle, 1 insert the recorder so its bottom slot meets the hook on the front of the cradle (at the low end). 2 Hold the top of the recorder and push it against the cradle until it clicks.

“REMOTE” is displayed on recorder if the USB cable is connected.

Remove the recorder from the cradle

4Make sure that the recorder's record/play indicator lamp isn't flashing, and remove the recorder from the cradle.

Hold the cradle with your hand, and raise the recorder from the top end to remove it from the hook, as shown in the illustration.

5Disconnect the USB cable.

........................................................................................................

Notes

•Do not touch the connection point on the front of the cradle (at the low end), as that may cause bad connection.

•The cradle does not have the recharging function.

to Connecting PC Your

45