Olympus FE-47 34EN, s(Settings 2) X, s(Settings 2) X s, s(Settings 2) X PIXEL MAPPING, s(Settings 2) X SOUND SETTINGS, Setting the date and time [X]

Selecting the camera sound and its volume [SOUND SETTINGS]

s(Settings 2) X SOUND SETTINGS

	Submenu 2	Submenu 3		Submenu 4	Application
					Select [ON] to disable camera sounds
SILENT MODE*1, 2		OFF/ON		—	(operating sound, shutter sound, and warning
					sound) and mute sound during playback.
BEEP		SOUND TYPE		1/2/3	Selects the operating sound and volume
					of the camera buttons (except the shutter
		VOLUME	OFF (No Sound) or
			2 levels of volume		button).
SHUTTER SOUND		SOUND TYPE		1/2/3	Selects the type and volume of the shutter
			OFF (No Sound) or
		VOLUME			sound.
			2 levels of volume
8		OFF (No Sound) or		—	Adjusts the warning sound volume.
		2 levels of volume
qVOLUME		OFF (No Sound) or		—	Adjusts the image playback volume.
		5 levels of volume
*1	Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback.
*2	Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television.

Adjusting the CCD and the image	Adjusting the brightness of the monitor
processing function [PIXEL MAPPING]	[s]

s(Settings 2) X PIXEL MAPPING

This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended.

For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again.

To adjust the CCD and the image processing function

Press the H button when [START] (Submenu 2) is displayed.

●The camera checks and adjusts the CCD and the image processing function at the same time.

s(Settings 2) X s

	Submenu 2	Application
BRIGHT/		Selects the monitor brightness
		depending on the surrounding
	NORMAL
		brightness.

Setting the date and time [X]

s(Settings 2) X X

“Setting the date, time and time zone” (p. 12)

To select the date display order

1Press I after setting Minute, and use FG to select the date display order.

X

Y M D TIME

2010.02 .26 12 :30 Y/M/D

Date order

CANCEL MENU SET OK

34EN