The following AA (R6) batteries cannot

be used.

Batteries whose bodies are only partially or not at all covered by an insulating sheet.

Batteries whose -terminals are raised, but not covered by an insulating sheet.

Batteries whose -terminals are flat and not completely covered by an insulating sheet. (Such batteries cannot be used even if the

-terminals are partially covered.)

•If NiMH batteries are not charged within the specified time, stop charging them and do not use them.

•Do not use a battery if it is cracked or broken.

•If a battery leaks, becomes discolored, deformed or becomes abnormal in any other way during operation, stop using the camera.

•If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately.

•Never subject batteries to strong shocks or continuous vibration.

Caution for Usage Environment

•To protect the high-precision technology contained in this product, never leave the camera in the places listed below, no matter if in use or storage:

•Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight, beaches, locked cars, or near other heat sources (stove, radiator, etc.) or humidifiers.

•In sandy or dusty environments.

•Near flammable items or explosives.

•In wet places, such as bathrooms or in the rain. When using products with weatherproof designs, read their manuals as well.

•In places prone to strong vibrations.

•Never drop the camera or subject it to severe shocks or vibrations.

•When mounted on a tripod, adjust the position of the camera with the tripod head. Do not twist the camera.

•Do not touch electric contacts on cameras.

•Do not leave the camera pointed directly at the sun. This may cause lens or shutter curtain damage, color failure, ghosting on the CCD, or may possibly cause fires.

•Do not push or pull severely on the lens.

•Before storing the camera for a long period, remove the batteries. Select a cool, dry location for storage to prevent condensation or mold from forming inside the camera. After storage, test the camera by turning it on and pressing the shutter button to make sure that it is operating normally.

•Always observe the operating environment restrictions described in the camera’s manual.

EN 51