E-5

5Dismounting the PPO-E04

1) When the PPO-E04 is mounted directly on the PT-E series case

(When using the ZUIKO DIGITAL ED 8mm Fisheye lens)

If any water is on the product, wipe it completely away and
make sure that the product is dry.
CAUTION: When the PPO-E04 is removed from the PT-E series case, water drops on the O-rings may
splash on the lens or camera. If this happens, wipe the water drops away from the lens and
camera with a dry cloth.
Make sure that all of the parts are completely dry before dismounting.
Holding the PT-E series case firmly with one hand, loosen the
PPO-E04 by turning it about 90 degrees counterclockwise. If
the PPO-E04 is attached too tightly to turn, wrap it with a piece
of rubber or similar non-slip material.
After loosening the PPO-E04, point its lens downward and
turn it further counterclockwise until it is separated from the
PT-E series case. Be careful not to drop the PPO-E04 or
PT-E series case.