Do not use the following chemicals for cleaning, corrosion prevention, prevention of fogging, repair or other purposes. When these are used for the Case directly or indirectly (with the chemicals in vaporized state), they may cause cracking under high pressure or other problems.

Chemicals which cannot be used

Explanation

Volatile organic solvents,

Do not clean the Case with alcohol, gasoline, thinner

or other volatile organic solvents or with chemical

chemical detergents

detergents etc. Pure water or lukewarm water is

 

sufficient.

 

 

 

Do not use anticorrosion agents. The metal parts use

Anticorrosion agent

stainless steel or brass, and washing with pure water

 

is sufficient.

Commercial defogging

Do not use commercial defogging agents. Always

agents

use the specified desiccant silica gel.

 

 

Grease other than specified

Use only the specified silicone grease for the silicone

silicone grease

O-ring, as otherwise the O-ring surface may

deteriorate and water leakage may be caused.

 

 

Do not use adhesive for repairs or other purposes.

Adhesive

When repair is required, please contact a dealer or a

 

service station of our company.

●Do not perform operations other than specified in this instruction manual, do not remove or modify parts other than specified, and do not use parts other than specified.

Any troubles in taking pictures or with the equipment resulting from the above actions shall be outside the guarantee.

Our company shall be in no way responsible for accidents involving immersion of a digital camera in water.

Our company shall not pay any compensation for accidents (injury or

material damage) at the time of use.

●When the enclosure of the balance weight breaks, the metal on the inside may corrode. Take care not to damage the enclosure.

After use, wash the balance weight with pure water and wipe off all moisture sufficiently.

E-6

Page 7
Image 7
Olympus PT-014 manual Explanation