SubmenuApplication
Panorama images are automatically
Auto combined just by swinging the camera in the shooting direction. Press the shutter
button once to begin the sequence.
Three frames are taken and combined
Manual by the camera. The user composes the shots using the guide frame and
manually releases the shutter.
The frames that were taken are
PCcombined into a panorama image using the PC software.
3 When shooting with [Auto]Use HI to select the angle of view and then press the A button.For details on installing the PC software, see “Charging the battery and setting up using the supplied CD” (p. 13).
When set to [Auto] or [Manual], [Image Size] (p. 40) is fixed to 2M or equivalent.
The focus, exposure, zoom position (p. 20), and white balance (p. 34) are locked at the first frame.
The flash (p. 32) is fixed to $(Flash Off) mode.
To shoot with [Auto]1Point the camera to the start position.
●Use FGHI to select the shooting direction.
2Press the shutter button to begin shooting. Move the camera slowly in the
| AUTO |
| FULL |
Cancel MENU | Save OK |
3When shooting reaches the end of the guide on the monitor, it finishes automatically.
●The camera automatically processes the images and the combined panorama image is displayed.
●To stop shooting in the middle, press the shutter button or A button. If the camera pauses for a while, shooting automatically finishes.
If the message “Image was not created.” is displayed, shoot again.
To exit the panorama function without saving an image, press the mbutton.
Taking pictures with [Manual]1Use FGHI to specify at which edge the next picture is to be connected.
MANUAL
Direction for combining the next frame
Set OK
2Press the shutter button to take the first frame. The
MANUAL | MANUAL |
1 | 2 |
Cancel MENU | Save OK |
1st frame
3Compose the next shot so that joint area 1 overlaps joint area 2.
4Press the shutter button to take the next shot.
Press the A button to combine just 2 frames.
Guide
EN 27