For information on using the menus, see “Setup menu” (p. 6).

Menus for Other Camera Settings

The default settings of the function are highlighted in .

Erasing data completely [Memory Format]/[Format]
r(Settings 1) X Memory Format/Format

Before formatting, check that no important data is left in the internal memory or card.

Cards must be formatted with this camera before first use or after being used with other cameras or computers.

Be sure to remove the card before formatting the internal memory.

 

 

Submenu 2

Application

 

 

 

Completely erases the image data

 

Yes

in the internal memory or card

 

 

 

(including protected images).

 

No

 

Cancels formatting.

 

 

 

 

Copying images in the internal memory to the card [Backup]
r(Settings 1) X Backup

 

Submenu 2

Application

Yes

Backs up image data in the internal

memory to the card.

 

 

 

 

No

 

Cancels the backup.

 

 

 

 

It takes some time to back up data. Chack that the battery has sufficient power before starting the backup.

Using an Eye-Fi card [Eye-Fi]
r(Settings 1) X Eye-Fi

 

 

Submenu 2

Application

 

Off

 

Disable Eye-Fi communication.

 

 

 

 

On

Enable Eye-Fi communication.

When using an Eye-Fi card, read the Eye-Fi card instruction manual carefully, and comply with the instructions.

Use the Eye-Fi card in compliance with the laws and regulations of the country where the camera is used.

In locations such as on an airplane, where the Eye-Fi communication is prohibited, remove the Eye-Fi card from the camera, or set [Eye-fi] to [Off].

This camera does not support the Eye-Fi card’s Endless mode.

EN 49