Memory card
This recorder uses memory in the form of SD card memory.
Compatible cards
The recorder supports cards with memory capacity between 512 MB to 32 GB.
Settings and operating environment relating to the
card
Check the latest operating information on the Olympus homepage (http://www.olympus. com) when using cards other than the included card. In addition, refer to the following pages as well when handling the card.
•Inserting and ejecting a SD card (☞ P.19).
•Formatting the card [Format] (☞ P.50).
SD card
3
1
2
SD card
1Card lock
SD card is equipped with a lock function. When the lock function is used, important data is protected by preventing it from being accidentally overwritten or erased.
When the lock function is set [
] will appear on the display.
Check card information [Card Info.]
Information such as the memory capacity and remaining memory for installed cards can be displayed on the recorder (☞ P.40).
Card Info.
SD
Remain 540MB
Capacity 2.0GB
BACKEXIT
Notes
•When initializing (formatting) a card, confirm that no necessary data is stored on the memory card beforehand. Initialization completely erases the existing data on the card.
•In some cases cards which have been formatted (initialized) by another device, such as a computer, cannot be recognized. Be sure to format them with this recorder before using.
•The card has a service life. When reaching the end of its life, writing or erasing data on the card will be disabled. In this case, replace the card.
•If you use a PC card adapter compatible with the card to save or delete some data on the card, the maximum recording time on the card may be decreased. To recover the original recording time, initialize/format the card in the recorder.
•Olympus will not be held liable for any data corruption or loss due to misuse of the media card.
1
Memory card
2 Index area
For writing down information identifying card or content.
3 Contact area
EN
Comes into contact with the recorder’s signal | 9 |
read contacts. | |
|
