hInserting Batteries
1Lightly press down on the arrow and slide the battery cover open.
2Insert two size-AAA alkaline batteries, observing the correct polarity.
3Close the battery cover completely.
• When the HOLD switch is set to the direction of the arrow, the display is turned off after [HOLD] is displayed. Follow the next step without regard to it.
An optional
Replacing the Batteries:
When [N] appears on the display, replace the batteries as soon as possible.
•To replace the battery, make sure that you set the HOLD switch to the opposite direction of the arrow before replacing.
hPower Supply
Poweron:SlidetheHOLDswitchinthedirection
opposite that indicated by the arrow. Power off: Slide the HOLD switch in the
direction indicated by the arrow while the recorder is not in operation.
Standby Mode and Display Shut Off:
If the recorder is stopped for 5 minutes or longer during recording or playing, it goes into Standby
hHold
Setting the HOLD switch to the direction of the arrow holds the current status, and all button operations are disabled. Remember to release the HOLD switch to use the recorder.
hSetting Time and Date [Time & Date]
If you have set the time and date, information as to when a sound file was recorded is stored automatically with that file.
When you install batteries for the first time or each time you replace the batteries, the “Month” indication will flash. In such a case, be sure to set the time and date by following steps 4through 6described below.
1Press and hold the DISP/MENU button for 1 second or longer to go to the main menu.
2Press the 9or 0 |
| |
button to select |
|
|
[Sub Menu]. |
|
|
3Press the PLAY/OK (`) | Time & Date | |
button. |
| |
• [Time & Date] appears on the |
| |
display, and [ | ] flashes. |
|
4Press the 9 or 0 |
| |
button to select the item |
| |
to set. |
|
|
• Select the item from “Month”, | 1. 1‘08 12:00AM | |
“Minute” with a flashing | ||
“Day”, “Year”, “Hour” and |
| |
point.
- 3 -