4Press the 9 or 0 button to select the set- ting.

• To go to the main menu screen

Mode:

HQ

select [Main Menu] from the

after the sub menu setting,

 

 

sub menu screen.

 

 

5Press the PLAY/OK (`) button to confirm the setting.6Press the STOP (4) button to close the menu.

Note:

The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected item is not applied.

hRecording Modes [Rec Mode]

The recording mode can be chosen from [HQ] (high quality sound recording), [SP] (standard recording), and [LP] (long-term recording).

In Menu mode selection:

Current recording mode

 

 

 

 

 

 

 

 

Mode: HQMode: SPMode: LP

 

 

 

VN-5200PC

Approx. 35 hours

Approx.69 hours

Approx.221hours

 

 

 

 

 

 

20 minutes

35 minutes

30 minutes

 

 

 

 

 

 

 

VN-3200PC

Approx. 8 hours

Approx. 17 hours

Approx. 54 hours

05m35s

00m00s

40 minutes

10 minutes

40 minutes

 

 

 

 

 

Notes:

The recording time shown above is for one continuous file. The available recording time may be shorter than specified if several files are recorded. (Use the remaining time and recorded time only as references.)

The above-noted recording times indicate times after deletion of the manual data stored in the recorder.

hMicrophone Sensitivity [Mic Sense]

Microphone sensitivity is adjustable to meet your recording needs.

In Menu mode selection:

Sense: Conf. (g) Sense: Dict. (i)

Note:

To ensure successful recording, make a test recording to select appropriate microphone sensitivity before recording.

Microphone sensitivity indicator

05m35s 00m00s

hUsing the Variable Control Voice Actuator [VCVA]

When the microphone senses that sound has reached a preset volume, the built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops it when the volume drops.

In Menu mode selection:

VCVA: OffVCVA: On

 

 

VCVA indicator

Adjust the Start/Stop Actuation Level:

1While the recorder is during recording mode, press the 9or 0buttons to adjust the pause sound level.

The VCVA level can be set to any of 15 different values. aVCVA Level

bStart level (moves to the right/left according to the set level)

05m35s 00m00s

a

05m35s 00m00s

Note:

b

The record/play indicator light is lit during recording. When the recorder is in Standby mode, the Record/Play indicator light flashes and [VCVA] flashes on the display.

- 8 -