hBasic Operation of the Menu Mode

1Whiletherecorderisdur-ingstopmode,pressand hold the DISP/MENU button for 1 second or longer.2Press the 9 or 0 button to select the menu item.

Go to the setting screen of the selected menu item.

To set the sub menu, select the [Sub Menu] from the main menu screen. And select and set the menu item from the sub menu screen in the same manner.

Menu

Guide icon: Tells you the next button to use by flashing.

RecMode

a b

a[^]: Press the PLAY/OK (`) button (Goes to the next screen).

b[\] or []]: Press the 9or 0button (Changes the item).

3Press the PLAY/OK (`) button.4Press the 9 or 0 button to select the set- ting.

• To go to the main menu screen

Mode:

HQ

select [Main Menu] from the

after the sub menu setting,

 

 

sub menu screen.

 

 

5Press the PLAY/OK (`) button to confirm thesetting.6Press the STOP (4) button to close the menu.

Note:

The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected item is not applied.

hRecording Modes [Rec Mode]

The recording mode can be chosen from [HQ] (high quality sound recording), [SP] (standard recording), [LP] (long-term recording), and [MP3] (MPEG1 layer 3).

In Menu mode selection:

 

 

Current recording mode

 

Mode: HQMode: SPMode: LPMode: MP3

 

 

 

 

 

 

 

 

 

Approx.

Approx.

Approx.

Approx.

 

 

 

 

 

 

141 h. 55 min.

279 h. 20 min.

888 h. 50 min.

72 h. 35 min.

 

 

 

 

 

 

 

 

05m35s 00m00s

Notes:

The recording time shown above is for one continuous file. The available recording time may be shorter than specified if several files are recorded (Use the remaining time and recorded time only as references).

The above-noted recording times indicate times after deletion of the manual data stored in the recorder.

hMicrophone Sensitivity [Mic Sense]

sensitivity indicator

 

Microphone

Microphone sensitivity is adjustable to meet your recording needs.

In Menu mode selection:

 

Sense: Conf. (g)Sense: Dict. (i)

 

 

Note:

 

05m35s

00m00s

To ensure successful recording, make a test recording to select appropriate microphone sensitivity before recording.

hUsing the Variable Control Voice Actuator [VCVA]

When the microphone senses that sound has reached a preset volume,

 

 

VCVA indicator

the built-in Variable Control Voice Actuator (VCVA) starts recording

 

 

 

 

automatically, and stops it when the volume drops.

 

 

 

 

In Menu mode selection:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VCVA: Off

 

VCVA: On

05m35s

00m00s

 

 

 

 

 

- 8 -