Setting Time/Date (Time&Date)
1 | If you set the date and time beforehand, the information when the file is recorded is automatically | |
stored for each file. Setting the date and time beforehand enables easier file management. | ||
|
Setting Time/Date (Time&Date)
The hour indicator will flash automatically when you load a battery before using the recorder for the first time, or after the recorder hasn’t been used for a long time. Proceed from step 1.
1 | Press the 9 or 0 button to |
select the item to set. | |
1 Select the item from “hour”, “minute”, “year” | |
| “month” and “day” with a flashing point. |
| Press the + or – button to set. |
| Follow the same steps by pressing the 9 |
2 | 2 or 0 button to select the next item, and |
press the + or – button to set. | |
| Press the OK button to complete |
| the setup screen. |
3 | 3 The clock will start from the set date and |
time. Press the OK button according to the | |
| time signal. |
| • You can choose between 12 and 24 hour |
| display by pressing the FOLDER/INDEX |
| button while setting the hour and minute. |
| Example: 5:45 P.M. |
| 5:45 PM ←→ 17:45 |
| (Initial setting) |
12