Using a remote control

1Select [On] for [HDMI Control] and turn the camera off.

2Connect the camera to the TV using an HDMI cable. “Using an HDMI cable” (p. 61)

3First turn on the TV, and then turn on the camera.

●Follow the on-screen guide displayed by the TV to operate the camera.

With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen.

If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and use the controls on the camera.

Reducing power consumption between shots [Sleep]

x (Setup menu) X Sleep

Submenu 2

Application

 

 

The monitor turns off automatically

20sec/1min/3min/

 

to save battery power when no

 

operations are performed (sleep

5min

mode). Choose the delay before the

 

 

 

 

camera enters sleep mode.

If no operations are performed for about 12 minutes after the camera enters sleep mode, the camera will turn off automatically.

Canceling sleep mode

Press the shutter button or an arrow key or rotate the mode dial.

Changing the display language [W]

x (Setup menu) X W

Submenu 2

Application

The language for the menus and

Languages error messages displayed on the monitor is selected.

1Use FGHI to select your language and press the A button.

Setting the date and time [X]

x (Setup menu) X X

“Date, time, time zone, and language” (p. 18)

To select the date display order

1Press I after setting Minute, and use FG to select the date display order.

X

Y M D Time

2011 . 02 . 26 12 30

Y/M/D

Date order

CancelSet

2Press A when settings are complete.

62EN