Operation way :
Press INTV + Power ON into Process Transducer (4 - 20 mA) mode. First of all, setting Ref1 “ MAX ” reference value (the “MAX” symbol will be flash),
then press | 0 |
|
| button to input “ MAX ” reference | ||
| 1/2/3 4/5/6 7/8/9 |
|
| |||
|
|
|
|
|
| |
0.001 ~ 9999, press |
| button and wait for speaker sound. Then | ||||
RECORD |
| |||||
the process transducer (4 - 20mA) mode setting is success. | ||||||
|
|
|
| Ref1- 0 | (A/D | |
“ LCD ” display value: |
| 16 |
| |||
※Available for (4mA ~ 20mA) transducer only.
4. BATTERY & FUSE REPLACEMENT 4-1 Battery Check & Replacement：
1.As battery power is not sufficient, the 
, will be shown on LCD replace with six new 1.5V batteries is required.
2.a). Disconnecting test leads.
b).Turning off multimeter with
d). Replace the batteries
e). Cover and secure the battery cover.
4-2 Fuse Replacement：
a). Disconnecting test leads. b). Turn off multimeter.
c). Open fuse cover with
d). Remove old fuse and replace with new fuse. e). Cover and secure the fuse cover.
※Only 5ψ×20mm fast blow type fuse is allowable.
To prevent electrical hazard or shock, turn off multimeter and disconnect test leads before removing any cover.
5. DATALOGGING