Omega SA 1538, 2520, 2500, 1120 Self-winding split seconds chronograph, Watch functions calibre

Models: 1120 1680 1108 1532 1538 2520 1424 2500 1530 1400

1 42
Download 42 pages 37.42 Kb
Page 22
Image 22

Self-winding split seconds chronograph

CALIBRE 3600 (fig. XVII) • 3612 (fig. XVIII) Watch functions (calibre 3600)

The crown has 2 positions:

1.Normal position (wearing position): when pushed into the case, the crown ensures that the watch is water-resistant.

2.Time setting: hour – minutes – seconds. Pull the crown out to position 2. The seconds hand will stop. Turn the crown forwards or backwards. Synchronise the seconds by pushing the crown back to position 1 to coincide with a given time signal.

Watch functions (calibre 3612)

The crown has 3 positions:

1.Normal position (wearing position): when pushed into the case, the crown ensures that the watch is water-resistant.

2.Date setting: pull the crown out to position 2, turn the crown backwards, then push the crown back to position 1.

NOTE: the date cannot be corrected between 9pm and 12.30am.

3.Time setting: hours – minutes – seconds. Pull the crown out to position 3. The seconds hand will stop. Turn the crown forwards or backwards. Synchronise the seconds by pushing the crown back to position 1 to coincide with a given time signal.

Occasional winding: if the watch has not been worn for 45 hours (cal. 3600) or 55 hours (cal. 3612) or more, wind it up with the crown in position 1.

Chronograph functions:

Pusher A: start – stop, start – stop etc.

Timing to within 1/8th of a second for up to 12 hours. Pusher B: reset (after a stop).

English

21

Page 22
Image 22
Omega SA 1538, 2520, 2500, 1120, 1400, 1532, 1108, 1680, 1424 Self-winding split seconds chronograph, Watch functions calibre