28
TC-08 User's Guide
Reserved error codes
Error | Error | Further information |
code |
|
|
|
|
|
7 | USBTC08_ERROR_NOT_RESPONDING | Cannot get a reply back from a USB |
|
| |
8 | USBTC08_ERROR_FW_FAIL | Unable to download firmware. |
9 | USBTC08_ERROR_CONFIG_FAIL | Missing or corrupted EEPROM. |
10 | USBTC08_ERROR_NOT_FOUND | Cannot find enumerated device. |
11 | USBTC08_ERROR_THREAD_FAIL | A threading function failed. |
12 | USBTC08_ERROR_PIPE_INFO_FAIL | Can not get USB pipe information. |
13 | USBTC08_ERROR_NOT_CALIBRATED | No calibration date was found. |
14 | USBTC08_ERROR_PICOPP_TOO_OLD | An old picopp.sys driver was found |
|
| on the system. |
Note: These reserved error code values are meaningful only to our technical support staff, but they are supplied to allow developers to display warnings in their applications. For more details on error codes, see troubleshooting.
Arguments | handle | Specifies the USB |
|
|
|
Returns | Invalid handle. | |
| Error | See the error code information above for further |
| code | explanation. |
