Page 9
Command set:
Display parameters: | UNITS | OHMS |
| UNITS | C |
| UNITS | K |
| UNITS | F |
| INPUT | A |
| INPUT | B |
| INPUT | |
Analogue parameters: | SPAN | Value in Ohms |
|
| ZERO Value in Ohms |
Measurement: | MEASURE |
|
Return to Local: | LOCAL |
|
|
|
|
Output Protocol
Replies will depend on the command implemented, and will be numeric or – with commas and spaces as delimiters. All replies will be terminated by CR and LF. The first number will be an error code.
0No error
1Calibration lost (EEPROM corruption)
3Broken probe
4Syntax error
There will be no fur ther numbers if:
a)There is an error
b)The primary command was UNITS, INPUT or LOCAL
Further output will be provided in the case of MEASURE, DUMP (DIAGNOSE).
1.MEASURE
Eg. If output is 0, 2351.7
First number | - error code |
Second number | - value in units set by previous commands |
|
|