OPERATING INSTRUCTIONS

1 Power Switch

The key turns the thermometer on or off. In the data SET mode, can not power off, must leave data SET mode then power off.

2°C/°F Selecting the Temperature Scale

Readings are dual displayed in either degrees Celsius(°C) or degrees Fahrenheit(°F). When the thermometer is turned on, it is set to the temperature scale that was in use when the thermometer was last turned off. To change the temperature scale, press the °C/°F key.

3HOLD Mode (only Main display)

Pressing the HOLD key to enter the Data Hold mode, the "HOLD" annun- ciator is displayed. When HOLD mode is selected, the thermometer held the present readings and stops all further measurements.

Pressing the HOLD key again to cancel HOLD mode causing thermometer to resume taking measurements.

In the MIN/MAX recording mode, press HOLD key to stop the recording. Press HOLD key again to resume recording. (Previously recorded reading are not erased).

4

Page 6
Image 6
Omega Vehicle Security HH503 manual Operating Instructions, Power Switch, F Selecting the Temperature Scale