TCIC User’s Manual
4
2. Installation
(The following description refers to Windows XP. Obviously, on
another operating system it might be different.)
1. Make sure that all package files have been copied – and
unzipped if necessary – to your hard disk.
2. Two types of drivers are available. Install the one that
meets best your requirements. Note that only one
driver may be installed at the same time. That is, if
for some reason you want to switch to the other driver,
first uninstall the retired one.
• The direct driver provides access via a DLL supplying
functions to directly control the device.
• The VCP (Virtual COM Port) driver would make the
TCIC appear as a spare COM port on the PC, e.g.
COM3.
Consider which driver is best for you and proceed
accordingly to step 3 or 4.
3. Installing the Direct DLL Driver:
3.1 If the VCP (Virtual COM Port) Driver is installed,
uninstall it as follows:
Click: Start – Control Panel – Add or Remove Programs –
FTDI USB Serial Converter Drivers – Change/Remove
Disconnect all TCIC boards from the USB port and click
Continue…