Omega Vehicle Security TCIC

TCIC User’s Manual

Click Finish.

3.2 Disconnect or disable the internet communication if

such exists. The reason for that is that there are cases

where the installation procedure automatically

communicates with manufacturer’s site, which might lead

to wrong operation.

3.3 Connect the TCIC card to your PC.

3.4 The ‘Found New Hardware Wizard’ appears.

Select the last option like this:

Contents

Main Page Page 1. Main Features Page 2. Installation Page Page Page Page Page Page Page Page 3. TCIC-Monitor .NET (dot NET) Page TCIC Users Manual 3.1 Title 3.2 Menus 3.2.1 File The following is a common setting for all the channels: The following are individual settings for each channel: no degrees millivolts hysteresis Page The following are common settings for all the channels: higher lower The following are individual settings for each channel: Page TCIC Users Manual 3.2.3 Library previous 3.3 "Outputs" Box TCIC Users Manual 3.4 "Save to File" Command ('Start' or 'Stop') 3.5 Channel Boxes 3.5.1 Channel Title 3.5.2 Digital Display Page TCIC Users Manual 4. Command Set and not 4.1 Requesting Data Page Page TCIC Users Manual 4.3 Setpoint Configuration remains on remains on direction Page TCIC Users Manual 4.4 Sample Program TCIC Users Manual 4.5 Troubleshooting 5. Multi-Card System This section is relevant only for the TCIC with the RS485 communication option. users responsibility (this will SELECT board b and DE-SELECT boards c & d) (this will SELECT board c and DE-SELECT boards b & d) (this will SELECT board d and DE-SELECT boards b & c) 6. USB, RS232 & RS485 Page 7. Specifications WARNING 8. LabVIEW Sample thermocouple