Omnimount G353 specifications Assembly Instructions, Stellar Video Tables G343, G343T, G348, Step

Step 7

Slide middle shelf onto bottom shelf. (Fig. 7a)

Grasp middle shelf firmly and lift it into position. (Fig. 7b) Align rear of middle shelf with rear support bracket. (Fig. 7c)

Rotate middle shelf into position into side support brackets. (Fig. 7d)

Caution: Ensure that rear and side brackets are fully engaged before releasing grasp on shelf.

Fig. 7a Fig. 7b Fig. 7c Fig. 7d

Step 8

Tighten rear shelf bracket screw. (Fig. 8a)

Re-secure the side brackets as close to shelf as possible. (Fig. 8b)

Place top shelf onto upper frame members. (Fig. 8c) Note: If the top shelf glass is unstable, move the rubber pad positions or double up the height of the lowest pad until the shelf glass is stable.

Caution: Never try to move table by pulling on glass shelves. Always move table by grasping the frame.

Fig. 8b Fig. 8c

Fig. 8a

Thank you for purchasing an OmniMount product.

Specifications are subject to change without prior notice.

Every effort has been made to provide accurate and error-free assembly and installation. OmniMount Systems disclaims liability for any difficulties arising from the interpretation of information contained in these instructions. If OmniMount products are used for purposes other than their original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for injuries or property damage, direct, indirect, or consequential, which may arise from the inability to use this product safely, properly, and in the manner for which it has been designed and manufactured. War- ranty does not apply to products which have been lost, damaged by misuse, abuse, or accident.

OmniMount Systems, Inc.

8201 South 48th Street • Phoenix, AZ 85044-5355

www.omnimount.com

Assembly Instructions

Stellar Video Tables: G343, G343T, G348

IMPORTANT: Consult your dealer if you have any questions regard- ing the proper assembly of this product.