Omnimount 1002851, G3FP SHELF English, Shelf Assembly, D. Установите полку на кронштейн, T-Bars

English

Shelf Assembly

D.

D. Установите полку на кронштейн.

A.

A.Loosely thread two Shelf Screws through each Shelf Bracket

T-Bars.

B.Slide both Shelf Bracket Assemblies into the Mounting Post. Then slide them into the desired position, and, using the supplied Hex Wrench, tighten both Shelf Bracket Assemblies. (The Shelf T-Bars will turn to the right once they are inside the Mounting Post and you begin tightening the Screws. When they tighten, they will grab the inside rails of the Mounting Post Channel.)

NOTE: Ensure that the Shelf Bracket is installed with the notched hole on top and facing the outside.

and into two Shelf

B.

E.

E. Затяните верхние винты, затем вставьте и затяните еще один винт в нижнее отверстие.

F.

C. Insert a Shelf Screw into each of the Shelf’s top screw holes.

C.

F. Отрегулируйте положение полки с помощью уровня.