Step 3
Secure Lift Column and Base Bracket in enclosure:
•Gently glide the lift column into place on the bayonet bracket so that the tapered slots on the column are secured to the extrusions on the bracket. Gently push down until the base bracket is touching the bottom of the enclosure. DO NOT ATTACH THE BASE BRACKET TO THE MOUNTING SUREFACE AT THIS TIME!
•For floating top installations it is recommended that the top of the lift column sits below the lip of the enclosure by 10mm (7/16”) to allow room for the top plate so that the lid sits flush and the guide pins function properly.
Figure A
2 |
Figure B
3 |
10
