Before Enclosure Construction!
Assemble lift mechanism and connect the TV to be used in the install to determine dimensions for the lift enclosure prior to construction. Be sure to leave room for adjustments If necessary. An out of cabinet assembly of the mechanism can be done using steps 1,4,6,8,9 and 10 in order.
(D) | (D + 2”) |
(W) | (W + 2”) |
(H) | (H + 2”) |
Minimum INTERIOR Dimensions
| (H) Minimum Height | |
| Height of lift in closed | |
| position or Height of TV + 2” | |
| NOTE: For use with the | |
| longer rails spacers will be | |
| needed above and below the | |
| lift mechanism | |
| (D) Minimum Depth | |
| Depth of TV + Depth of | |
(W) Minimum Width | Mount + 2” | |
| ||
Width of TV + 2” | Be very careful not to build | |
the enclosure too shallow. | ||
This will allow 1 “ of clearance on either | ||
The mount may not function | ||
side of the television. | or damage to the TV could |
occur | 6 |
|
