Main
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
CAUTION
CAUTION:
SAFETY INSTRUCTIONS
Important Safety Instructions
Table of contents
Chapter-2: Preparation before using the DV824 ..............................................15
Page
Page
Chapter-7: Creating and editing ALE files (EDIT EDL FILE menu) ................99
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
About this manual
Precautions
<About replacing the lithium battery>
Precautions on installation
Notes on moisture condensation
Page
Main features/functions
What is in the box
DV824 options and related Fostex products
http://www.fostex.com
Options
Related products
Page
Chapter-2: Preparation before using the D V824
Connect the supplied AC adaptor as shown below.
Power connection
[DC IN 12V] connector
AC adaptor (Model AD-15C)
AC outlet
[POWER] switch
Realtime clock setting
DVD-RAM disks used with the DV824
pages 83 ~ 91
Advanced operations
Inserting/removing a disk
About recommended disks
Important notice for setting an uncovered disk to the tray
Unformatted disk
Unused formatted disk
Recorded disk
CD-DA format audio CD
Initial format of a DVD-RAM disk
Advanced operations
Page
Adjusting display contrast
Chapter-3: Names and functions
Front panel
-
Rear panel
+
Front panel
+
] key (See page 51 for details).
1234 5
6
6) LCD display
7) Time mode indicators
11) [LIST PLAY/5, J, K, L/
10) [FILE SEL/2, A, B, C/
8) [QUICK SET/1, Space] key
12) [PRE REC/3, D, E, F] key
13) [CHASE/6, M, N, O] key
14) [
15) [EXIT/NO] key
16) [MENU] dial/[ENTER/YES] key
18) [SAFE/RDY/9, W, X, Y, Z] key
19) [CLEAR/
22) [TIME SEL/7, P, Q, R, S/
20) [ALL INPUT/8, T , U, V] key
21) [LOCATE/
23) [MARK/CUE/0, symbol] key
24) Transport control keys
The maximum cueing speed depends on the FS and the number of tracks of a file.
25) [OPEN/CLOSE] key
26) [PHONES] section
27) [USB (KYBD ONLY)] port
The maximum cueing speed depends on the FS and the number of tracks of a file.
2) [PARALLEL REMOTE] connector
Rear panel
8
1234567
69 1011 13 12
1) [ANALOG INPUT BALANCED] connectors
TR
4) Terminate switch (100, ON/OFF)
5) [P2/ES BUSS/THRU] connector
6) Blank panels
7) Cooling fan
11) [DIGITAL I/O AES/EBU] connector
13) [ANALOG OUTPUT B ALANCED] connector s
10) [WORD IN]/[WORD OUT] connector
12) [WORD IN] terminate switch
9) [ETHERNET] port
Display
Home screen
File name
Next file name
Disk remaining
Status information
Screen examples
7-segment LED time indicator
HMS F
Chapter-4: Connection
Table of contents
Analog audio connection
Basic connection
Digital audio connection
Sync signal (word clock) connection
External video editor connection
Ethernet connection
External parallel controller connection
see pages 47 and 117 respec- tively
Connection for optional cards
Time code input/output connection (for the optional TC/SYNC card)
Connection to a film machine (for the optional TC/SYNC card)
Connection to a personal computer (for the optional IEEE1394/USB card)
~`
Other connection
USB keyboard connection
see page 123 for details
F1 key F2 key F3 key F4 key
USB port USB keyboard
Page
Chapter-5: Recording/pla ybac k
Before making basic analog or digital audio recording, you need to make some set- tings.
Basic audio recording
[STOP/HOME] indicator is lit.
Status information area
), as well as set the CD stop mode for audio CD playback (
In the quick setup mode, you can also set the next file name (
Entering the quick setup mode
CLK
FRAME
INPUT
FS/BIT TC GEN
TC frame rate selection ("
" of the status information area)
Sampling frequency and bit length selection
FS/BIT
22/16 22.05kHz/16bit 44/16 44.1kHz/16bit 48/16 48kHz/16bit 44/24 44.1kHz/24bit
48/24 48kHz/24bit 88/24 88.2kHz/24bit 96/24 96kHz/24bit
System clock reference selection
Clock pull up/pull down setting
UP/DW
Recording track selection
TRACK
see page 132 for details
Next file name setting
NEXT
Recording level setting
Reference level setting
Other settings
Digital input channel selection
Time display mode selection
LTC TC IN ABS GEN
When the optional TC/SYNC card is not installed, "--H --M --S --F" is shown.
Headphone monitor selection
You can select the headphone monitor source using the rotary switches in the PHONES section.
Starting recording
2) Press the [RECORD] key to start recording.
see page 142 for details
). You can also change the file name later (
see page 115 for de- tails
Page
Recording in Pre rec mode
Canceling recording (False Start)
Recording the slate tone
Cue point setting
Setting a cue point on the fly during audio recording
Viewing the cue point list
Editing a cue point
Editing a cue label
<Notes for editing a label>
<Note>
Deleting a cue point
Adding a new cue point to the cue point list
Editing cue point data
Basic playback
Normal playback
<Selecting a file from the FILE SEL screen>
<Selecting a file using the [SKIP/CURSOR key>
Cueing playback
Skip/locate functions
Skipping through files
Skipping through cue points
Locating to the beginning or end of a file
Locating to the last located point
Locating to a desired time point
Locating to a desired cue point
Chapter-6: Adv anced operations
Audio CD playback
Setting CD stop mode
List play function
There are four "link modes" for playing back linked audio files continuously, as be- low.
List play in "LTC-Link" mode
List play in "Song-Link" mode
List play in "List-Link" mode
Setting list play mode/Executing list play
] key.
2) While "<All Link>" is highlighted, press the [ENTER/YES] key.
3) Select the desired link track and link mode. "Link Track (max)" setting
"Link Mode" setting
<About "Stop Mode">
Viewing linked audio files
Locating to the beginning of the play list
Locating to the end of the play list
Controlling the unit from a video editor
Word
Audio signal
Digital Mixer
HOUSE SYNC Video Editor VTR
Device type setting
Sync play setting
Editor preset setting
File data transfer using FTP server function
<Connecting with a personal computer>
<FTP client applications>
<Where audio files are stored?>
Setting example of PC connection
Connecting DV824 directly to PC
2) Make TCP/IP setting on the PC.
3) Start up the FTP application of the PC, and make setting for connection. <Setting of WS-FTP>
<Setting of Fetch>
Connecting DV824 to LAN
FTP command details
The following shows usable and unusable FTP commands when you can use the DV824 as the FTP server.
Only a single user can log in. More than one user cannot log in at the same time.
Sub net mask setting
TCP/IP SETUP menu setting
IP address setting
3) Use the [MENU] dial to select a desired menu item and press the [ENTER/YES] key.
Anonymous on/off setting
Login name/password setting
TCP/IP Enable mode on/off setting
Mac address checking
File transfer example between the DV824 and a PC
Page
Time code recording/playback
Frame rate setting
TC generator mode setting
24H Run Rec Run Free Run EXT Run
You can make settings for time code recording/playback via the "TC SETUP" menu on the MENU mode.
Jam function
Playing back time code
Time code output setting
<Menu items which affect time code output>
Executing jam function
Auto copy function
Selecting auto copy mode
Page
Making auto copy
2) Press the [RECORD] key to start recording to the partition.
3) Press the [STOP/HOME] key to stop recording.
1) Press the [SAFE/RDY] key to make the unit record ready (the [SAFE/RDY] indicator flashes).
Disk copy function
Making disk copy
File copy function
Making file copy
Page
Dual drive recording
(*) About "mirror" disk
Formatting in the "DDR" mode
Page
8) Press the [STOP/HOME] key to exit the MENU mode.
Making dual drive recording
1) Start recording to partition 2 ("PTO2").
2) After completing recording, press the [STOP/HOME] key to stop recording.
Chasing external TC
Preparations
Chasing
Data export to PC
Connecting PC to the unit
How to unmount the DV824 from the PC
Example of copying data to a computer hard disk
Example of exporting data to a computer application
7) Select a saving file and click on "Select" (indicated by an arrow 6).
The computer starts saving the file to the selected file.
The saved file is added to the audio region list (indicated by an arrow 7).
The "Spot Dialog" setting window appears.
9) Click on " " in the "Spot Dialog" setting window, followed by "OK" (indicated by an arrow 9).
Page
Chapter-7: Creating and editing ALE files
About an ALE file
Creating a new ALE file
2) While "<New file>" is highlighted, press the [ENTER/YES] key.
3) Use the [MENU] dial (or the alphanumeric keys) to enter the desired name.
4) After entering the desired name, press the [ENTER/YES] key to confirm your setting.
5) While "Video format" is highlighted, press the [ENTER/YES] key.
7) After making necessary settings, press the [EXIT/NO] key.
8) Press the [ENTER/YES] key.
Adding audio file entries to an ALE file
Page
Viewing audio file entries
Viewing and editing audio file entries
Adding an audio file entry to an existing ALE file
Deleting an audio file entry
Editing an ALE file
Editing an ALE file name
Remaking an ALE file
Deleting an ALE file
Page
Chapter-8: MENU mode
Table of contents
About MENU mode
Menu item Details of settings
Default
SYS SETUP menu
Basic procedure for using the "SYS SETUP" menu
2) While "SYS SETUP" is highlighted, press the [ENTER/YES] key.
3) Use the [MENU] dial to select the desired menu item and press the [ENTER/YES] key.
Default file name (SCENE NAME/TAKE NUMBER) setting
Default file name setting [Default file name]
Default track name setting [Default track name]
Next event number setting [Next event No.]
Recording track setting [Record tracks]
Recording FS/bit length setting [Record FS&Bit]
Pull up/down setting [Pull Up/Down]
Maximum file length setting [Max file length]
Input selection [Select input]
Digital input channel setting [Setup digital in]
Digital output signal format selection [Digital out]
Pre recording time setting [Pre rec time]
Tone rec time setting Tone rec On/Off setting
Auto EE mode selection [Auto EE mode]
Slate tone/pop tone recording mode setting [Tone rec mode]
Peak hold time setting [Peak hold]
Reference level setting [Reference level]
End pop tone On/Off setting
Skip mode setting [Skip mode]
Diagnoses file setting [diagnoses]
USB keyboard type setting [Keyboard]
Startup disk selection [Startup disk]
ROM version checking [Version]
Menu item Setting/function
Default
TC SETUP menu
.
Details of the "Force JAM" menu item are described in "Advanced operations".
See page 81 for details
1) While the unit is stopped, press the [ENTER/YES] key.
Basic procedure for using the "TC SETUP" menu
The basic procedure for using the "TC SETUP" menu is as described below.
System clock selection [Sync clock]
TC frame rate selection [Frame rate]
Internal TC generator setting [Set Gen TC]
1) Select the "Set Gen TC" menu item and press the [ENTER/YES] key.
Generator mode selection [Gen mode]
2) Press the [ENTER/YES] key.
<User> MMDDYY00 DDMMYY00
User bit setting [Gen Ubit]
BOTH TC UBIT
Jam mode setting [JAM mode]
Repro Gen
Time code output source selection [Sel. TC Out]
Default LTC start time setting [Default LTC start]
1) Select the "Default LTC start" menu item and press the [ENTER/YES key.
2) Press the [ENTER/YES] key again.
LTC start time editing [Edit LTC start]
UBIT setting of playback time code [RepTC Ubit]
1) Select the "RepTC Ubit" menu item and press the [ENTER/YES] key.
On Off
Time code output while paused [Rep pause TC]
LTC BiPhase
Reference time code selection [Ref TC sel]
Once Continue
Frame Sync
Chase mode selection [Chase mode]
Chase offset setting [Chase offset]
1) Select the "Chase offset" menu item and press the [ENTER/YES] key.
2) Press the [ENTER/YES] key again.
Chase offset editing
Chase offset trimming
Catch offset
Synchronization to a film machine [Bi-Phase setup]
1) Select the "Bi-Phase setup" menu item and press the [ENTER/YES] key.
Resetting the current film position to the start time
1) While "ResetCounter" is highlighted, press the [ENTER/YES] key.
Editing the film start time
Setting the number of pulses per frame
Setting the film leader length and film size
DISK UTILITY menu
Basic procedure for using the "DISK UTILITY" menu
Editing a file name [Edit file name]
Viewing a file information and editing descriptor information [File info.]
1) Select the "File Info." menu item and press the [ENTER/YES] key.
Viewing file information
Viewing descriptor information
1) Select "Edit descriptor" and press the [ENTER/YES] key.
Line No. Contents Details
Editing descriptor information
Adding descriptor information
Deleting descriptor information
Deleting an unnecessary audio file [Delete file]
Restoring a deleted audio file [Restore Del. file]
Optimizing a disk [Optimize disk]
Formatting a disk [Format]
Drive selection:
Volume label setting:
Format mode selection:
Physical format on/off setting
1) While "[EXECUTE]" is highlighted, press the [ENTER/YES] key.
2) Press the [ENTER/YES] key.
3) Press the [STOP/HOME] key to exit the MENU mode.
Editing the reel number (Volume label) [Reel No.]
Record protection On/Off setting [Rec protect]
Resume function On/Off setting [Resume]
Partition protection On/Off setting [Part. protect]
LOAD SETUP menu
SAVE SETUP menu
Page
Inputs/Outputs
Recording/playback
General
Physical dimensions
+
-
430
88
Declaration of EC Directive
The Affect of Immunity on This Equipment FOSTEX DISTRIBUTORS LIST IN EUROPE
