Fostex DV824 owner manual 144, Line No Contents Details

DVD Multitrack Recorder DV824

The sound sequence information of a BWF file includes items as below and you can edit them if necessary. "<New line>" at the bottom is used for adding a new descriptor information. See "Adding descriptor information" for details.

The table below shows the details of the descriptor information which Fostex registers by default, as shown on the screen example above.

The information can be used for creating an AVID ALE file, as well as can be directly exported to the AVID system via IEEE 1394 (or via a disk).

<Note>: Each character string before "=" shows the "header ID" of currently available meta data.

Line No.	Contents	Details
01	fUBITS=$	The user bit used when recording time code is recorded
		by default.
02	fSCENE=**********	When creating a file, the character string before "-" in the
		file name is set as a SCENE by default.
		When creating a file, the three-digit number between "-"
03	fTAKE=***	and the file extension in the file name is set as a TAKE
		number by default.
		When creating a file, the reel number (volume label) on
04	fTAPE=**********	the disk is set as a TAPE number (up to 8 digits) by de-
		fault.
05	fEVENT=*****	The five-digit number set by the "Set Next Event" menu
		item in the "System Setup" menu of the MENU mode is
		set as an EVENT number by default.
		Track name of each track.
06	fTRK1=**********	A default track name (up to 16 characters) for each track
		is recorded.
07		The screen above shows the example when the record-
	fTRK2=**********	ing mode is set to stereo (2-track). The number of lines
		increases when recording more tracks.
08	fNOTE=	This is used for comment. By default, no data exists.

144