DVD Multitrack Recorder DV824

Editing cue point data

To edit cue point data, use the [MENU] dial to select "Position" while "Label" is flashing and press the [ENTER/YES] key.

The subframe value of the current time data flashes, showing that you can now edit it.

flashing

Select the edit point using the [SKIP/CURSOR ] key, edit the value using the [MENU] dial, and confirm the setting by pressing the [ENTER/YES] key (the display returns to the CUE LIST screen).

<Note>: Regardless of the cursor position, pressing the [CLEAR/ FALSE START ] key resets the time data to "00h00m00s00f".

Deleting a cue point

To delete an unnecessary cue point, select "Delete" using the [MENU] dial and press the [ENTER/YES] key ("Sure?" flashes).

Press the [ENTER/YES] key again to delete the cue point from the list. The display returns to the Home screen.

flashing

<Note>: After deleting a cue point, the label column of the cue point becomes empty while the time value column shows "--h--m--s--f--".

Adding a new cue point to the cue point list

While the CUE LIST screen is shown, you can add a new cue point to the list. Select a desired cue number which does not hold data.

By pressing the [ENTER/YES] key, time data of the current recorder position is set as the cue point.

In the example below, Cue 05 is set when the current recorder position is "01h 58m 20s **f ** sf" (LTC time).

58

Page 58
Image 58
Fostex DV824 owner manual Adding a new cue point to the cue point list, Editing cue point data, Deleting a cue point