Fostex DV824 owner manual Locating to a desired time point, Locating to a desired cue point

EDIT TIME

DVD Multitrack Recorder DV824

Locating to a desired time point

You can locate the unit to any desired point by specifying the time value.

1)While the unit is stopped (or playing back), press the [SHIFT] key to light

the [SHIFT] indicator, followed by the [LOCATE/

EDIT TIME

] key.

The DV824 enters the time edit mode and the popup window for entering time data appears on the display.

flashing

<Note>: The time value can be specified according to the time mode selected before entering the time edit mode. In the screen example above, you can specify the time value based on LTC.

2)Use the [MENU] dial (or alphanumeric keys) to enter the desired time value.

You can move the cursor position using the [SKIP/CURSOR ] keys. Pressing the [CLEAR/ FALSE START ] key resets the time value to "00h 00m 00s 00f 00sf".

You can enter the time value between "00h00m00s00f00sf" and

"23h 59m 59s **f 99sf" (** depends on the frame rate of the audio file).

3)After entering the desired time value, press the [LOCATE/ EDIT TIME

The unit quickly locates to the point at the specified time.

] key.

<Note>: If you enter a time value which is out to the current file and

press the [LOCATE/] key, “Out of Zone” is shown and the locate operation is not executed.

Locating to a desired cue point

You can locate the unit quickly to a desired cue point by selecting the cue point from the cue list.

1)While the unit is stopped, press the [MARK/CUE] key.

The CUE LIST screen appears.

2)Use the [MENU] dial (or alphanumeric keys) to select the desired cue point from the cue list, and press the [LOCATE/ EDIT TIME ] key.

The unit quickly locates to the selected cue point and the display returns to the Home screen.

<Note>: Unlike the function described above in "Skipping through cue points", this function is always available regardless of the "Skip mode" setting in the "SYS SETUP" menu of the MENU mode.

62