Fostex DV824 Time code output while paused Rep pause TC, Reference time code selection Ref TC sel

DVD Multitrack Recorder DV824

Time code output while paused [Rep pause TC]

Using the "Rep pause TC" menu item, you can select whether time code is output from the [TIME CODE OUTPUT] connector or not while the recorder is paused.

<Note>: The "Rep pause TC" menu item setting is effective only when the optional TC/ SYNC card is installed. When it is not installed, "Void! No TC Card" is shown and you cannot make setting.

Select the "Rep pause TC" menu item and press the [ENTER/YES] key. The current setting starts flashing and you can now select "On" or "Off".

Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your setting. Press the [STOP/HOME] key to exit the MENU mode.

Options	Details
On	When the "Sel TC Out" menu item is set to "Repro" and the unit is stopped (or
	paused), a paused time code value (same time code value) is output intermittently.
Off	When the "Sel TC Out" menu item is set to "Repro" and the unit is stopped (or
	paused), no time code is output (default setting).

Reference time code selection [Ref TC sel]

Using the "Ref TC sel" menu item, you can select the time code reference between LTC and Biphase pulse.

<Note>: The "Ref TC sel" menu item setting is effective only when the optional TC/ SYNC card is installed. When it is not installed, "Void! No TC Card" is shown and you cannot make setting.

Select the "Ref TC sel" menu item and press the [ENTER/YES] key.

The current setting starts flashing and you can now select the option.

Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm your setting. Press the [STOP/HOME] key to exit the MENU mode.

Options	Details
LTC	The unit is referenced to LTC fed to the [TIME CODE IN] connector (default setting).
BiPhase	The unit is referenced to BiPhase pulse fed to the [BI-PHASE INPUT] connector.

134