Screen examples | Fostex DV824 manual

DVD Multitrack Recorder DV824

Screen examples

When no disk is set to the DVD-RAM drive

When no disk is set to the DVD-RAM drive, "--Nodisk--" is shown in the "File name" area on the Home screen.

When a formatted unused disk is set to the DVD- RAM drive

When formatted unused DVD-RAM disk is loaded, "-Nofiles!-" is shown in the "File name" area on the Home screen.

When a recorded disk is set

When a recorded DVD-RAM disk is loaded, a file name is shown in the "File name" area on the Home screen.

MENU list screen

The MENU list screen is shown when pressing the [ENTER/YES] key while the unit is stopped.

This screen is the first level screen of the MENU mode and you can select a desired menu from 11 menus listed on this screen using the [MENU] dial.

SYS SETUP menu screen

This menu screen is shown when selecting "SYS SETUP" from the MENU list screen and pressing the [ENTER/YES] key.

23 menu items are available in the "SYS SETUP" menu.

DISK UTILITY menu screen

This menu screen is shown when selecting "DISK UTILITY" from the MENU list screen and pressing the [ENTER/YES] key.

Twelve menu items regarding disk settings are avail- able in the "DISK UTILITY" menu.

TC SETUP menu screen

This menu screen is shown when selecting "TC SETUP" from the MENU list screen and pressing the [ENTER/YES] key.

Sixteen menu items regarding time code recording/ playback, synchronization to an external device, etc. are available in the "TC SETUP" menu.

35

Image 35

Fostex DV824 owner manual Screen examples

Contents

DVD Multitrack Recorder Safety Instructions Important Safety Instructions Table of contents Skip/locate functions Recording/playbackAdvanced operations Jam function the optional Model 8348 required 105 Creating and editing ALE files Edit EDL File menu100 103 156 Specifications140 155 About this manual Precautions on installation Introduction Main features/functions Related products What is in the boxDV824 options and related Fostex products Options DVD Multitrack Recorder DV824 Table of contents Preparation before using the DV824 Turning on the power Power connection Realtime clock setting Inserting/removing a disk About recommended disks CD-DA format audio CD Unformatted diskUnused formatted disk Recorded disk Drive Initial format of a DVD-RAM disk Press the ENTER/YES key again Key Adjusting display contrast Rear panel Front panel Front panel Slate TONE/4, G, H, I key Time mode indicatorsLCD display Quick SET/1, Space key EXIT/NO key PRE REC/3, D, E, F keyCHASE/6, M, N, O key Shift key ALL INPUT/8, T, U, V key SAFE/RDY/9, W, X,Y, Z keyClear Transport control keys MARK/CUE/0, symbol key Record key OPEN/CLOSE keyPhones section USB Kybd only port Rear panel Analog Input Balanced connectorsParallel Remote connector DC in 12V connector P2/ES BUSS/INPUT connectorTerminate switch 100Ω, ON/OFF P2/ES BUSS/THRU connector Analog Output Balanced connectors Word IN/WORD OUT connectorDigital I/O AES/EBU connector Word in terminate switch Home screen Status information Current settings of menu items are shown Screen examples Edit EDL File menu screen Segment LED time indicatorTCP/IP Setup menu screen RS422 Setup menu screen Connection Table of contents Digital audio connection Basic connectionAnalog audio connection Ethernet connection Sync signal word clock connectionExternal parallel controller connection External video editor connection Connection to a film machine for the optional TC/SYNC card Connection for optional cards USB keyboard connection Other connection DVD Multitrack Recorder DV824 Skip/locate functions Recording/playback Basic audio recording Setup for recording in quick setup modeQuick setup mode Select the desired item and press the ENTER/YES key Entering the quick setup modeInput signal selection Input of the status information area 30DF 23.9729.97DF TC generator setting of the status information area 48kHz/16bit Recording tracks 7GB 7GB 3x speed22.05kHz/16bit 44.1kHz/16bit Next file name setting Next of the status information area Digital input channel selection Other settingsReference level setting Recording level setting Headphone monitor selection Time display mode selection Press the Record key to start recording Starting recordingPress the SAFE/RDY key to make the unit record ready Tip To stop recording, press the STOP/HOME key To cancel the most recent take, press the ENTER/YES key Canceling recording False StartRecording in Pre rec mode For details Recording the slate tone Viewing the cue point list Cue point settingSetting a cue point on the fly during audio recording Editing a cue label Editing a cue point Deleting a cue point Adding a new cue point to the cue point listEditing cue point data Selecting a file from the File SEL screen Selecting a file using the SKIP/CURSOR keyBasic playback Normal playback To stop playback, press the STOP/HOME key Cueing playback Locating to the beginning or end of a file Skip/locate functionsSkipping through files Skipping through cue points While the unit is stopped, press the MARK/CUE key Shift indicator, followed by the LocateLocating to a desired time point Locating to a desired cue point Auto copy function the optional Model 9057 required File data transfer using FTP server functionControlling the unit from a video editor Jam function the optional Model 8348 required Audio CD playback Option Function Setting CD stop modeTrack selection in the File SEL mode While SYS Setup is highlighted, press the ENTER/YES key List-Link List play functionLTC-Link Song-Link 001 002 003 004 List play in LTC-Link modeList play in Song-Link mode List play in List-Link mode While the unit is stopped, press the List Play Setting list play mode/Executing list playWhile All Link is highlighted, press the ENTER/YES key About Stop Mode Link Mode setting Highlight Execute and press the ENTER/YES key Viewing linked audio filesLocating to the beginning of the play list Locating to the end of the play list Local Necessary setting RS422 Setup menuControlling the unit from a video editor Both Lynx DVDVideo FTP client applications File data transfer using FTP server functionConnecting with a personal computer Where audio files are stored? Setting of Fetch Setting example of PC connectionConnecting DV824 directly to PC Make TCP/IP setting on the PC If you use Fetch Connecting DV824 to LANFTP command details Sub net mask setting TCP/IP Setup menu settingIP address setting Mac address checking Anonymous on/off settingLogin name/password setting TCP/IP Enable mode on/off setting Click on the desired drive File transfer example between the DV824 and a PCStart up the WS FTP application Click on OK in the Session Properties dialog box Transferring an audio file from the PC to the DV824 Click on the bwf folderTransferring an audio file from the DV824 to the PC 24H Run Frame rate settingTC generator mode setting Recording time code Menu items which affect time code output Time code output settingPlaying back time code To exit the jam function, press the EXIT/NO key Executing jam functionPress the ENTER/YES key to execute the jam function Select a partition to which audio data is recorded Selecting auto copy modeImmediately mode Background mode Display now shows the Menu list screen Press the STOP/HOME key to stop recording Making auto copyPress the Record key to start recording to the partition Disk copy function the optional Model 9057 required Making disk copy If you are sure, press the ENTER/YES key Making file copy After making audio file selection, press the ENTER/YES key About mirror disk Formatting in the DDR mode While Execute is highlighted, press the ENTER/YES key Use the Menu dial to select DDR and press the ENTER/YES key Start recording to partition 2 PTO2 Making dual drive recording Set the system clock reference to Video Set the chase mode appropriatelyPreparations Chasing Macintosh OS9.2.1, OS9.2.2 When connecting via the USB port Windows XP, WindowsMacintosh OSX, OS9.2.1, OS9.2.2 Example of copying data to a computer hard disk Connecting PC to the unitHow to unmount the DV824 from the PC Click on Convert -, followed by Done indicated by an arrow Example of exporting data to a computer application Computer starts saving the file to the selected file Spot Dialog setting window appears DVD Multitrack Recorder DV824 107 103105 About an ALE file Creating a new ALE file100 Sets the reel number Tape of an ALE file 101While New file is highlighted, press the ENTER/YES key Tape Press the ENTER/YES key After making necessary settings, press the EXIT/NO key102 While Video format is highlighted, press the ENTER/YES key While New entry is highlighted, press the ENTER/YES key Adding audio file entries to an ALE file103 While ALL-TAKE.ale is highlighted, press the ENTER/YES key After adding audio file entries, press the EXIT/NO key How to set Circle Take to a file104 105 Viewing and editing audio file entriesViewing audio file entries Press the EXIT/NO key twice Adding an audio file entry to an existing ALE fileDeleting an audio file entry 106 After completing editing the name, press the ENTER/YES key Editing an ALE fileEditing an ALE file name 107 Select the desired type and press the ENTER/YES key Remaking an ALE file108 While Remake ALE is highlighted, press the ENTER/YES key Press the ENTER/YES key to delete the file Deleting an ALE file109 After Remake ALE completes, press the EXIT/NO key 110 111 112 About Menu mode 113 SYS Setup menuMenu item Details of settings Default Example of a menu item which has the second level screen Basic procedure for using the SYS Setup menu114 While the unit is stopped, press the ENTER/YES key 115 Default file name setting Default file nameSelecting the File name mode Default file name Scene NAME/TAKE Number setting 116 Default track name setting Default track nameNext event number setting Next event No 117 Recording track setting Record tracksRecording FS/bit length setting Record FS&Bit 118 Pull up/down setting Pull Up/DownMaximum file length setting Max file length Analog Digital input channel setting Setup digitalInput selection Select input 119 Spdif Digital output signal format selection Digital outPre recording time setting Pre rec time 120 Tone rec On/Off setting Auto EE mode selection Auto EE modeSlate tone/pop tone recording mode setting Tone rec mode Tone rec time setting 122 Peak hold time setting Peak holdReference level setting Reference level End pop tone On/Off setting 123 Skip mode setting Skip modeDiagnoses file setting diagnoses USB keyboard type setting Keyboard Japan Startup disk selection Startup diskROM version checking Version 124 Both TC Setup menuMenu item Setting/function Default 125 126 Basic procedure for using the TC Setup menu 127 System clock selection Sync clockTC frame rate selection Frame rate Select the Set Gen TC menu item and press the ENTER/YES key Generator mode selection Gen modeInternal TC generator setting Set Gen TC 128 129 130 Jam mode setting JAM modeUser bit setting Gen Ubit 131 Default LTC start time setting Default LTC startTime code output source selection Sel.TC Out 132 LTC start time editing Edit LTC start Select the RepTC Ubit menu item and press the ENTER/YES key Ubit setting of playback time code RepTC Ubit133 Off Time code output while paused Rep pause TCReference time code selection Ref TC sel 134 Continue Chase mode selection Chase mode135 Once Chase offset editing Chase offset setting Chase offset136 Catch offset 137Chase offset trimming 138 Synchronization to a film machine Bi-Phase setupResetting the current film position to the start time While ResetCounter is highlighted, press the ENTER/YES key Editing the film start time Setting the number of pulses per frameSetting the film leader length and film size 139 140 Disk Utility menu 141 Basic procedure for using the Disk Utility menu Enter the desired name Editing a file name Edit file name142 Select the File Info. menu item and press the ENTER/YES key 143Viewing file information Viewing descriptor information 144 Line No Contents Details Deleting descriptor information 145Editing descriptor information Adding descriptor information Press the ENTER/YES again Deleting an unnecessary audio file Delete file146 Select Delete file and press the ENTER/YES key 147 Restoring a deleted audio file Restore Del. fileSelect Restore Del. file and press the ENTER/YES key 148 Optimizing a disk Optimize disk Drive selection Formatting a disk Format149 Normal Volume label settingFormat mode selection 150 151 Physical format on/off setting Select the Reel No. menu item and press the ENTER/YES key Editing the reel number Volume label Reel No152 153 Record protection On/Off setting Rec protect 154 Resume function On/Off setting ResumePartition protection On/Off setting Part. protect 155 Load Setup menu User box name entry Save Setup menu156 User box selection 157 Specifications 158 159 160 Physical dimensions 161 Affect of Immunity on This Equipment 413760