Fostex DV824 owner manual To stop recording, press the STOP/HOME key, Tip

DVD Multitrack Recorder DV824

3)To stop recording, press the [STOP/HOME] key.

When recording ends, the Home screen changes as shown below left. By pressing the [SAFE/RDY] key to exit the record ready mode, the file name and disk remaining time are dismissed from the Home screen as shown below right.

From the Home screen above left, you can see that the "SCENE_001.wav" audio file has been created and the next file name is "SCENE_002.wav".

In the "REP.F" field, you can see the FS and bit length of the recorded file.

<Note>: If you do not make the next recording after the first recording ends, press the [SAFE/READY] key to exit the record ready mode (i.e. to turn of the indicator).

4)By pressing the [ REWIND] key while holding down the [STOP/HOME] key, the unit locates to the beginning of the recorded file ("Locate ABS 0" function).

Pressing the [PLAY] key starts playback of the recorded audio file from the beginning. See page 59 for details about playback.

<Tip>

If recording was not successful, you can cancel it. See "Canceling recording" on the next page.

<Tip>

You can also use the "Pre recording" function which prevents missing the start of a take (see page 54 for details).

<Tip>

During recording, you can set cue points which can be used as markers (see page 56 for details).

You can also record the slate tone at the beginning of the audio file (see page 55 for details).

53