Fostex DV824 owner manual Time display mode selection, Headphone monitor selection

DVD Multitrack Recorder DV824

Time display mode selection

The 7-segment time display shows time data in the currently selected time mode. You can select the time mode between the following using the [TIME SEL/ CONTRAST] key. By default, time data is shown in the "LTC" mode when the unit is turned on.

LTC TC IN ABS GEN

	H	M	S	F
LTC	The time display shows LTC currently being played back or recorded in "h:m:s:f"
	format.
	When the optional TC/SYNC card is installed, the time display shows external time
TC IN	code fed to the [TIME CODE INPUT] connector in "h:m:s" format. In the frame field,
	the frame rate (24, 29, etc.) of the receiving time code is shown.
	When the optional TC/SYNC card is not installed, "--H --M --S --F" is shown.
ABS	The time display shows ABS currently being played back or recorded in "h:m:s:f"
	format.

GEN

When the optional TC/SYNC card is installed, the time display shows time code generated by the internal TC generator in "h:m:s:f" format only if "Gen mode" is set to "Free Run" (see page 128 for details about "Gen mode" setting).

<Note>: When the optional TC/SYNC card is not installed, "--H --M --S --F" is shown.

Headphone monitor selection

You can select the headphone monitor source using the rotary switches in the PHONES section.

	TR ODD- MONO			SOLO
			TR2	TR3
		EVEN	TR1	TR4
		TR7-8		TR5
		TR5-6		TR6
MIN	MAX	TR3-4		TR7
		TR1-2		TR8
		PHONES

SOLO	Monitors a solo track (1 to 8) selected by the [SOLO] select switch.
MONO	Monitors all available tracks in mono.
TR ODD-EVEN	Monitors all available tracks in stereo (odd tracks to L, even tracks to R).
TR7-8	Monitors tracks 7 and 8.
TR5-6	Monitors tracks 5 and 6.
TR3-4	Monitors tracks 3 and 4.
TR1-2	Monitors tracks 1 and 2.

51