DVD Multitrack Recorder DV824

Record protection On/Off setting [Rec protect]

Using the "Rec protect" menu item, you can select "On" or "Off" of the protection (record inhibit) for the currently loaded audio file.

The following procedure assumes that an audio file you want to make protection setting is loaded.

<Note>: You cannot edit a protected audio file.

Select the "Rec protect" menu item and press the [ENTER/YES] key.

The current option ("On" or "Off") starts flashing (the default is "Off") and you can now select the desired option.

Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your setting. Press the [STOP/HOME] key to exit the MENU mode.

<Note>: If you enter the UTILITY menu when no file is available on the current disk,

"Rec protect:---" is shown instead of "Rec protect: Off (or On)". This means there is no audio file to which the "Rec protection" setting is applied. If you select it and press the [ENTER/YES] key in this case, "Void!" is shown.

<Note>: When a software-protected audio file is loaded, the " " icon is shown in the status information area on the Home screen, as shown below.

If the current DVD-RAM disk is hardware-protected, the " " icon is shown beside the reel number area, as shown below.

<The current file is protected.>

<The current disk (or partition) is protected.>

<Note>: The DV824 can protect each partition of the optional hard disk drive. See "Partition protection On/Off setting [Part. protect]" on the next page for details.

153

Page 153
Image 153
Fostex DV824 owner manual Record protection On/Off setting Rec protect, 153