Fostex DV824 owner manual Ethernet port, Word IN/WORD OUT connector, Digital I/O AES/EBU connector

DVD Multitrack Recorder DV824

9)[ETHERNET] port

This port is used to connect to the Ether network.

The connector type is RJ45 (conformed to 100/10BASE-T FTP). The LINK and TX/RX indicators light in the following conditions.

•The LINK indicator lights when the unit recognizes the network.

•The TX/RX indicator flashes when the unit is sending or receiving data.

10)[WORD IN]/[WORD OUT] connector

The [WORD IN] connector receives a word clock signal. The [WORD OUT] connector feeds word clock signal. The connector type is BNC.

11)[DIGITAL I/O AES/EBU] connector

This connector inputs and outputs AES/EBU or S/P DIF digital signals.

You can set the digital input channel by the "Setup Digital In" menu item of the "SYS SETUP" menu in the MENU mode (see page 119 for details).

The unit automatically detects the digital input signal format.

The digital output signal format can be set by the "Digital out" menu item of the "SYS SETUP" menu in the MENU mode (see page 120 for details).

The connector type is D-sub 25-pin.

		Signal	Hot		Cold
13	1
		Input 1/2	1		14
		Input 3/4	2		15
		Input 5/6	3		16
		Input 7/8	4		17
25	14	Output 1/2	5		18
		Output 3/4	6		19
		Output 5/6	7		20
		Output 7/8	8		21
		Frame GND	10, 12, 13, 22, 23
				24, 25
		Open		9, 11

*The connector pin assignment is compatible with the D-sub 25-pin connectors on YAMAHA equipment.

12)[WORD IN] terminate switch

Terminates the word input signal by setting the switch to “ON”.

13)[ANALOG OUTPUT BALANCED] connectors

These connectors output analog audio signals of tracks 1 through 8. The connector type is XLR-3-32 (balanced/+4dBu).

1 3

1

2

3

GND

HOT

COLD

2

32