TC Setup menu, 125, Both | Fostex DV824 manual

DVD Multitrack Recorder DV824

TC SETUP menu

In the TC SETUP menu, 16 menu items for settings regarding time code recording/ playback and synchronization to an external device are available. These settings are valid when the optional TC/SYNC card is installed to the unit.

<Note>: Details of the "Force JAM" menu item are described in "Advanced operations". See

page 81 for details.

Menu item	Setting/function	Default

Sync Clock	Selects the system clock.	INT

Frame Rate	Selects the time code frame rate.	25

Gen Mode	Selects the generator mode of the internal TC generator.	Rec Run

Set Gen TC	Sets TC generator start time and userbit when the generator mode is set	-
	to Free Run or Rec Run.	-
	to Free Run or Rec Run.

* Force JAM	Executes Force Jam to external time code while the generator mode is	-
	set to Free Run.

JAM mode	Selects the Jam mode when the generator mode is set to Free Run.	BOTH

Gen Ubit	Selects userbit of output time code.	<User>

Sel. TC OUT	Selects output time code source.	Repro

Default LTC start	Sets the default LTC start time when no external time code is fed to the	1h 00m 00s
	unit.

Edit LTC Start	Sets the LTC start time of a playback file.	-

Rep TC Ubit	Sets userbit of playback time code.	EEEEERRR

Rep Pause TC	Selects On/Off of time code output while paused.	Off

Ref TC Sel	Selects the reference time code.	LTC

Chase Mode	Selects the chase mode of the unit against the reference time code.	Once

Chase Offset	Sets chase offset value.	-

BiPhase Setup	Makes settings required for synchronizing to a film machine.	-

125

Image 125

Fostex DV824 owner manual TC Setup menu, 125, Menu item Setting/function Default, Both

Contents

DVD Multitrack Recorder Safety Instructions Important Safety Instructions Table of contents Skip/locate functions Recording/playbackAdvanced operations Jam function the optional Model 8348 required 100 Creating and editing ALE files Edit EDL File menu103 105 140 Specifications155 156 About this manual Precautions on installation Introduction Main features/functions DV824 options and related Fostex products What is in the boxOptions Related products DVD Multitrack Recorder DV824 Table of contents Preparation before using the DV824 Turning on the power Power connection Realtime clock setting Inserting/removing a disk About recommended disks Unused formatted disk Unformatted diskRecorded disk CD-DA format audio CD Drive Initial format of a DVD-RAM disk Press the ENTER/YES key again Key Adjusting display contrast Rear panel Front panel Front panel LCD display Time mode indicatorsQuick SET/1, Space key Slate TONE/4, G, H, I key CHASE/6, M, N, O key PRE REC/3, D, E, F keyShift key EXIT/NO key ALL INPUT/8, T, U, V key SAFE/RDY/9, W, X,Y, Z keyClear Transport control keys MARK/CUE/0, symbol key Phones section OPEN/CLOSE keyUSB Kybd only port Record key Rear panel Analog Input Balanced connectorsParallel Remote connector Terminate switch 100Ω, ON/OFF P2/ES BUSS/INPUT connectorP2/ES BUSS/THRU connector DC in 12V connector Digital I/O AES/EBU connector Word IN/WORD OUT connectorWord in terminate switch Analog Output Balanced connectors Home screen Status information Current settings of menu items are shown Screen examples TCP/IP Setup menu screen Segment LED time indicatorRS422 Setup menu screen Edit EDL File menu screen Connection Table of contents Digital audio connection Basic connectionAnalog audio connection External parallel controller connection Sync signal word clock connectionExternal video editor connection Ethernet connection Connection to a film machine for the optional TC/SYNC card Connection for optional cards USB keyboard connection Other connection DVD Multitrack Recorder DV824 Skip/locate functions Recording/playback Basic audio recording Setup for recording in quick setup modeQuick setup mode Select the desired item and press the ENTER/YES key Entering the quick setup modeInput signal selection Input of the status information area 30DF 23.9729.97DF TC generator setting of the status information area 22.05kHz/16bit Recording tracks 7GB 7GB 3x speed44.1kHz/16bit 48kHz/16bit Next file name setting Next of the status information area Reference level setting Other settingsRecording level setting Digital input channel selection Headphone monitor selection Time display mode selection Press the Record key to start recording Starting recordingPress the SAFE/RDY key to make the unit record ready Tip To stop recording, press the STOP/HOME key To cancel the most recent take, press the ENTER/YES key Canceling recording False StartRecording in Pre rec mode For details Recording the slate tone Viewing the cue point list Cue point settingSetting a cue point on the fly during audio recording Editing a cue label Editing a cue point Deleting a cue point Adding a new cue point to the cue point listEditing cue point data Basic playback Selecting a file using the SKIP/CURSOR keyNormal playback Selecting a file from the File SEL screen To stop playback, press the STOP/HOME key Cueing playback Skipping through files Skip/locate functionsSkipping through cue points Locating to the beginning or end of a file Locating to a desired time point Shift indicator, followed by the LocateLocating to a desired cue point While the unit is stopped, press the MARK/CUE key Controlling the unit from a video editor File data transfer using FTP server functionJam function the optional Model 8348 required Auto copy function the optional Model 9057 required Audio CD playback Track selection in the File SEL mode Setting CD stop modeWhile SYS Setup is highlighted, press the ENTER/YES key Option Function LTC-Link List play functionSong-Link List-Link List play in Song-Link mode List play in LTC-Link modeList play in List-Link mode 001 002 003 004 While the unit is stopped, press the List Play Setting list play mode/Executing list playWhile All Link is highlighted, press the ENTER/YES key About Stop Mode Link Mode setting Locating to the beginning of the play list Viewing linked audio filesLocating to the end of the play list Highlight Execute and press the ENTER/YES key Controlling the unit from a video editor Necessary setting RS422 Setup menuBoth Local Lynx DVDVideo Connecting with a personal computer File data transfer using FTP server functionWhere audio files are stored? FTP client applications Connecting DV824 directly to PC Setting example of PC connectionMake TCP/IP setting on the PC Setting of Fetch If you use Fetch Connecting DV824 to LANFTP command details Sub net mask setting TCP/IP Setup menu settingIP address setting Login name/password setting Anonymous on/off settingTCP/IP Enable mode on/off setting Mac address checking Start up the WS FTP application File transfer example between the DV824 and a PCClick on OK in the Session Properties dialog box Click on the desired drive Transferring an audio file from the PC to the DV824 Click on the bwf folderTransferring an audio file from the DV824 to the PC TC generator mode setting Frame rate settingRecording time code 24H Run Menu items which affect time code output Time code output settingPlaying back time code To exit the jam function, press the EXIT/NO key Executing jam functionPress the ENTER/YES key to execute the jam function Immediately mode Selecting auto copy modeBackground mode Select a partition to which audio data is recorded Display now shows the Menu list screen Press the STOP/HOME key to stop recording Making auto copyPress the Record key to start recording to the partition Disk copy function the optional Model 9057 required Making disk copy If you are sure, press the ENTER/YES key Making file copy After making audio file selection, press the ENTER/YES key About mirror disk Formatting in the DDR mode While Execute is highlighted, press the ENTER/YES key Use the Menu dial to select DDR and press the ENTER/YES key Start recording to partition 2 PTO2 Making dual drive recording Preparations Set the chase mode appropriatelyChasing Set the system clock reference to Video Macintosh OS9.2.1, OS9.2.2 When connecting via the USB port Windows XP, WindowsMacintosh OSX, OS9.2.1, OS9.2.2 Example of copying data to a computer hard disk Connecting PC to the unitHow to unmount the DV824 from the PC Click on Convert -, followed by Done indicated by an arrow Example of exporting data to a computer application Computer starts saving the file to the selected file Spot Dialog setting window appears DVD Multitrack Recorder DV824 107 103105 About an ALE file Creating a new ALE file100 While New file is highlighted, press the ENTER/YES key 101Tape Sets the reel number Tape of an ALE file 102 After making necessary settings, press the EXIT/NO keyWhile Video format is highlighted, press the ENTER/YES key Press the ENTER/YES key 103 Adding audio file entries to an ALE fileWhile ALL-TAKE.ale is highlighted, press the ENTER/YES key While New entry is highlighted, press the ENTER/YES key After adding audio file entries, press the EXIT/NO key How to set Circle Take to a file104 105 Viewing and editing audio file entriesViewing audio file entries Deleting an audio file entry Adding an audio file entry to an existing ALE file106 Press the EXIT/NO key twice Editing an ALE file name Editing an ALE file107 After completing editing the name, press the ENTER/YES key 108 Remaking an ALE fileWhile Remake ALE is highlighted, press the ENTER/YES key Select the desired type and press the ENTER/YES key 109 Deleting an ALE fileAfter Remake ALE completes, press the EXIT/NO key Press the ENTER/YES key to delete the file 110 111 112 About Menu mode 113 SYS Setup menuMenu item Details of settings Default 114 Basic procedure for using the SYS Setup menuWhile the unit is stopped, press the ENTER/YES key Example of a menu item which has the second level screen Selecting the File name mode Default file name setting Default file nameDefault file name Scene NAME/TAKE Number setting 115 116 Default track name setting Default track nameNext event number setting Next event No 117 Recording track setting Record tracksRecording FS/bit length setting Record FS&Bit 118 Pull up/down setting Pull Up/DownMaximum file length setting Max file length Input selection Select input Digital input channel setting Setup digital119 Analog Pre recording time setting Pre rec time Digital output signal format selection Digital out120 Spdif Slate tone/pop tone recording mode setting Tone rec mode Auto EE mode selection Auto EE modeTone rec time setting Tone rec On/Off setting Reference level setting Reference level Peak hold time setting Peak holdEnd pop tone On/Off setting 122 Diagnoses file setting diagnoses Skip mode setting Skip modeUSB keyboard type setting Keyboard 123 ROM version checking Version Startup disk selection Startup disk124 Japan Menu item Setting/function Default TC Setup menu125 Both 126 Basic procedure for using the TC Setup menu 127 System clock selection Sync clockTC frame rate selection Frame rate Internal TC generator setting Set Gen TC Generator mode selection Gen mode128 Select the Set Gen TC menu item and press the ENTER/YES key 129 130 Jam mode setting JAM modeUser bit setting Gen Ubit 131 Default LTC start time setting Default LTC startTime code output source selection Sel.TC Out 132 LTC start time editing Edit LTC start Select the RepTC Ubit menu item and press the ENTER/YES key Ubit setting of playback time code RepTC Ubit133 Reference time code selection Ref TC sel Time code output while paused Rep pause TC134 Off 135 Chase mode selection Chase modeOnce Continue Chase offset editing Chase offset setting Chase offset136 Catch offset 137Chase offset trimming Resetting the current film position to the start time Synchronization to a film machine Bi-Phase setupWhile ResetCounter is highlighted, press the ENTER/YES key 138 Setting the film leader length and film size Setting the number of pulses per frame139 Editing the film start time 140 Disk Utility menu 141 Basic procedure for using the Disk Utility menu Enter the desired name Editing a file name Edit file name142 Viewing file information 143Viewing descriptor information Select the File Info. menu item and press the ENTER/YES key 144 Line No Contents Details Editing descriptor information 145Adding descriptor information Deleting descriptor information 146 Deleting an unnecessary audio file Delete fileSelect Delete file and press the ENTER/YES key Press the ENTER/YES again 147 Restoring a deleted audio file Restore Del. fileSelect Restore Del. file and press the ENTER/YES key 148 Optimizing a disk Optimize disk Drive selection Formatting a disk Format149 Format mode selection Volume label setting150 Normal 151 Physical format on/off setting Select the Reel No. menu item and press the ENTER/YES key Editing the reel number Volume label Reel No152 153 Record protection On/Off setting Rec protect 154 Resume function On/Off setting ResumePartition protection On/Off setting Part. protect 155 Load Setup menu 156 Save Setup menuUser box selection User box name entry 157 Specifications 158 159 160 Physical dimensions 161 Affect of Immunity on This Equipment 413760