Fostex DV824 owner manual Resume function On/Off setting Resume, 154

DVD Multitrack Recorder DV824

Resume function On/Off setting [Resume]

Using the "Resume" menu item, you can select "On" or "Off" of the resume function. By setting it to "On", the current audio file and its playback position is stored to the resume file when a DVD-RAM disk is ejected. Therefore, the unit automatically loads the same audio file at the same position next time you set the same disk to the unit.

Select the "Resume" menu item and press the [ENTER/YES] key.

The current setting ("On" or "Off") starts flashing (the default is "Off") and you can now select the desired option.

Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your setting. Press the [STOP/HOME] key to exit the MENU mode.

Partition protection On/Off setting [Part. protect]

Using the "Part. protect" menu item, you can select "On" or "Off" of the software protection (record inhibit) for the current partition.

The following procedure assumes that a partition you want to make protection set- ting is selected as the current drive.

Select the "Part. protect" menu item and press the [ENTER/YES] key.

The current setting ("On" or "Off") starts flashing and you can now select the desired option (the default is "Off").

<Note>: If the optional hard disk drive is not installed or a partition is not selected as the current drive, "---" is shown.

Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your setting. Press the [STOP/HOME] key to exit the MENU mode.

<Note>: When a protected partition is loaded, the " " icon is shown beside the partition number on the Home screen, as well as beside the partition name on the drive select screen (as shown below).

154