Samsung HL-R6767W manual Setting the Remote Control Mode

Special Features

Setting the Remote Control Mode

Sets your remote control’s mode to Anynet or G-LINKTM.

The Anynet functions and the G-LINKTMfunctions of external devices cannot be operated at the same time. Use this menu to set your remote control’s mode.

1	Press the MENU button.
	Press the … or † button to

select “Setup”, then press the ENTER button.

2 Press the … or † button to select “Port Selection”, then press the ENTER button.

3 Press the … or † button to select “Anynet” or “G-Link”, then press the ENTER button.

Press the EXIT button to exit.

	Setup
Input	Language	: English	√
Picture	Time		√
	V-Chip		√
Sound	Caption		√
Channel	MenuTransparency	: Medium	√
	Blue Screen	: Off	√
Setup	Color Weakness		√
Listings	▼ More
	Move	Enter	Return

		Setup
Input	▲ More
Picture	PC		√
	Port Selection	: G-Link	√
Sound	Function Help	: Off	√
Channel	CableCARDTM		√
	CableCARDTM Setup		√
Setup
Listings	Move	Enter	Return

		Setup
Input	▲ More
Picture	PC
	Port Selection
			Anynet
Sound	Function Help		G-Link
Channel	CableCARDTM
	CableCARDTM Setup

Setup

Listings

Move Enter Return

NOTES

•The default setting for the remote control mode is “G-Link”.

•Select the “G-Link” to operate an external device after connecting the IR Controller cable to the G-LINKTMterminal.

(Refer to the TV Guide On ScreenTM manual and TV Guide On ScreenTM Quick Setup Sheet for further information on G-LINKTM.) If you set the remote control mode to G-LINKTM, Anynet functions are not available. To use Anynet functions, set your remote control mode back to “Anynet”. (For further information on Anynet’s functions refer to the “Anynet” manual.)

•To download program listings, the TV Guide On ScreenTM system needs to be able to change channels on your cable box when the TV is not in use. Please connect the supplied G-LINKTMcable to the G-LINKTMjack of the TV. After you connect the G-LINKTMcable you will be able to control your cable box using the TV’s remote.

English - 102