Samsung PS-42C7HD manual Screen Burn Protection, Setting the Blue Eye

Screen Burn Protection

To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes.

1Press the MENU ( ) button to display the menu.

2Press the … or † button to select Setup, then press the ENTER/OK ( ) button.

3Press the … or † button to select Screen Burn Protection, then press the ENTER/OK ( ) button.

4Select the required option by pressing the … or † button, then press the ENTER/OK ( ) button.

Available options: Pixel Shift, All White, Signal Pattern

5When you are satisfied with your setting, press the ENTER/OK ( ) button.

6Press the EXIT button to exit.

TV	Screen Burn Protection
	Pixel Shift
	All White
	Signal Pattern
	Move	Enter	Return
TV		Pixel Shift

Pixel Shift	: On
Horizontal Dot	: 4
Vertical Line	: 4
Time	: 4
Move	Enter	Return

◆Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen.

-Set Pixel Shift to On by pressing the … or † button, then press the ENTER/OK ( ) button.

-Select the required option by pressing the … or † button, then press the ENTER/OK ( ) button. Available options: Horizontal Dot, Vertical Line, Time

➢Optimum condition for pixel shift;

Horizontal Dot	4
Vertical Line	4
Time (minute)	4

◆All White: This function helps remove after images on the screen by changing the colour of pixels to white.

Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time.

◆Signal Pattern: This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time.

➢To remove after images on the screen, use either “All White” or “Signal Pattern” function.

Although both of the two functions remove after images on the screen, “Signal Pattern” is more effective.

➢The after image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after images on the screen.

If after image is not improved after the execution of the function, repeat the function again.

➢Press any button on the remote control to cancel this feature.

Setting the Blue Eye

You can set the power of Blue LED to be on. If the power is off when Blue Eye is off, the Blue LED goes off after 5 seconds. This will save power and reduce eye fatigue.

1Press the MENU ( ) button to display the menu.

2Press the … or † button to select Setup, then press the ENTER ( ) button.

TV	Setup
More
Energy Saving	: Off
Screen Burn Protection
Blue Eye	: On
Move	Enter	Return

3Press the … or † button to select Blue Eye, then press the ENTER ( ) button.

4Select Off or On by pressing the … or † button, then press the ENTER ( ) button.

◆Off: LED(Blue) will not come on.

◆On: LED(Blue) will come on after you turn the TV off.

5Press the EXIT button to exit.

English - 19