Samsung PS-42C7HD manual Checking the Signal Information, Upgrading the Software Option

Checking the Signal Information

You can get information about the signal status.

1Press the D.MENU button.

Result: The DTV menu is displayed.

2Press the … or † button to select System. Result: The System menu is displayed.

3Press the ENTER/OK ( ) button.

4Press the … or † button to select Signal Information. Press the ENTER/OK ( ) button.

Result: The technical information for signal status is displayed.

-Service

-Service ID

-Multiplex

-Network

-Bit Error Level

-Signal Strength

5Press the D.MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

Upgrading the Software (Option)

System

Product Information

Signal Information

Software Upgrade

Common Interface

Reset

Move Enter Return

Signal Information

Service : ?

Service ID : 0000

Multiplex : ? (TSID 0000,ONID 0000)

Network : ? (ID 0000)

Bit Error Level : 0

Signal Strength : 87

Return

To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade.

◆Upgrade Now

If you select Upgrade Now, the iDTV immediately installs the new upgrade and then restarts.

◆Upgrade Later

If you select Upgrade Later, the upgrade is postponed until the next restart or channel change some 90 minutes later, when the upgrade dialog appears again.

System

Product Information

Signal Information

Software Upgrade

Common Interface

Reset

Move Enter Return

◆Don’t Upgrade

If you select Don’t Upgrade, the iDTV does not perform the upgrade and the software upgrade banner is not displayed again. The upgrade is still stored internally, to subsequently upgrade to the new version then the following sequence of steps are performed.

1 Press the D.MENU button.

Result: The DTV menu is displayed.

2Press the … or † button to select System. Result: The System menu is displayed.

3Press the ENTER/OK ( ) button.

4Press the ▲ or ▼ button to select Software Upgrade. Press the ENTER/OK ( ) button.

Result: The information for Software Upgrade is displayed.

5If necessary, press the ENTER/OK ( ) button again to display the software version information.

6Press the D.MENU button to return to the Software Upgrade menu.

7To switch to an alternative version, press the red button.

Press the blue button to reset, activate the upgrade and restart.

8Press the D.MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

Software Upgrade

Current Software: T_MUSTDUK0_0012

Default

Alternative Software: T_MUSTDUK0_1000 (New version)

Switch Default Software

Move Return Info

Software Upgrade

Current Software: T_MUSTDUK0_0012

Default

Alternative Software: T_MUSTDUK0_1000

(New version) New Default

Confirm

Move Return Info

Software Upgrade

Software Version: T_MUSTDUK0_0012

Date: 18 Jan 2006

English - 33

Return