Display now shows the Menu list screen | Fostex DV824 guide

DVD Multitrack Recorder DV824

2)While the unit is stopped, press the [ENTER/YES] key to enter the MENU mode.

The display now shows the MENU list screen.

3)While "SYS SETUP" is highlighted, press the [ENTER/YES] key.

The display now shows the SYS SETUP menu screen.

4)Use the [MENU] dial to select the "Auto copy" menu item and press the [ENTER/ YES] key.

The current setting flashes and you can now select the desired auto copy mode. By default, "Off" flashes.

You can select from among "Off", "BGRD (Background) and "IMME" (Immedi- ately).

5)Use the [MENU] dial to select the desired option and press the [ENTER/YES] key.

After the display shows "Setup auto copy" followed by "Ready auto copy", the selected mode is set.

The setting is stored to the DV824 flash ROM.

In this procedure example, it is assumed that "IMME" (Immediately) is selected.

6)Press the [STOP/HOME] key to exit the MENU mode.

The display now shows the Home screen for the partition.

According to the copy mode selection in step 5) above, "" icon (when selecting "IMME") or "" icon (when selecting "BGRD") is shown on the left of the status information area.

84

Image 84

Fostex DV824 owner manual Display now shows the Menu list screen

Contents

DVD Multitrack Recorder Safety Instructions Important Safety Instructions Table of contents Recording/playback Advanced operationsSkip/locate functions Jam function the optional Model 8348 required Creating and editing ALE files Edit EDL File menu 100103 105 Specifications 140155 156 About this manual Precautions on installation Introduction Main features/functions What is in the box DV824 options and related Fostex productsOptions Related products DVD Multitrack Recorder DV824 Preparation before using the DV824 Table of contents Power connection Turning on the power Realtime clock setting About recommended disks Inserting/removing a disk Unformatted disk Unused formatted diskRecorded disk CD-DA format audio CD Initial format of a DVD-RAM disk Drive Press the ENTER/YES key again Adjusting display contrast Key Front panel Rear panel Front panel Time mode indicators LCD displayQuick SET/1, Space key Slate TONE/4, G, H, I key PRE REC/3, D, E, F key CHASE/6, M, N, O keyShift key EXIT/NO key SAFE/RDY/9, W, X,Y, Z key ClearALL INPUT/8, T, U, V key MARK/CUE/0, symbol key Transport control keys OPEN/CLOSE key Phones sectionUSB Kybd only port Record key Analog Input Balanced connectors Parallel Remote connectorRear panel P2/ES BUSS/INPUT connector Terminate switch 100Ω, ON/OFFP2/ES BUSS/THRU connector DC in 12V connector Word IN/WORD OUT connector Digital I/O AES/EBU connectorWord in terminate switch Analog Output Balanced connectors Home screen Current settings of menu items are shown Status information Screen examples Segment LED time indicator TCP/IP Setup menu screenRS422 Setup menu screen Edit EDL File menu screen Table of contents Connection Basic connection Analog audio connectionDigital audio connection Sync signal word clock connection External parallel controller connectionExternal video editor connection Ethernet connection Connection for optional cards Connection to a film machine for the optional TC/SYNC card Other connection USB keyboard connection DVD Multitrack Recorder DV824 Recording/playback Skip/locate functions Setup for recording in quick setup mode Quick setup modeBasic audio recording Entering the quick setup mode Input signal selection Input of the status information areaSelect the desired item and press the ENTER/YES key 23.97 29.97DF30DF TC generator setting of the status information area Recording tracks 7GB 7GB 3x speed 22.05kHz/16bit44.1kHz/16bit 48kHz/16bit Next file name setting Next of the status information area Other settings Reference level settingRecording level setting Digital input channel selection Time display mode selection Headphone monitor selection Starting recording Press the SAFE/RDY key to make the unit record readyPress the Record key to start recording To stop recording, press the STOP/HOME key Tip Canceling recording False Start Recording in Pre rec modeTo cancel the most recent take, press the ENTER/YES key Recording the slate tone For details Cue point setting Setting a cue point on the fly during audio recordingViewing the cue point list Editing a cue point Editing a cue label Adding a new cue point to the cue point list Editing cue point dataDeleting a cue point Selecting a file using the SKIP/CURSOR key Basic playbackNormal playback Selecting a file from the File SEL screen Cueing playback To stop playback, press the STOP/HOME key Skip/locate functions Skipping through filesSkipping through cue points Locating to the beginning or end of a file Shift indicator, followed by the Locate Locating to a desired time pointLocating to a desired cue point While the unit is stopped, press the MARK/CUE key File data transfer using FTP server function Controlling the unit from a video editorJam function the optional Model 8348 required Auto copy function the optional Model 9057 required Audio CD playback Setting CD stop mode Track selection in the File SEL modeWhile SYS Setup is highlighted, press the ENTER/YES key Option Function List play function LTC-LinkSong-Link List-Link List play in LTC-Link mode List play in Song-Link modeList play in List-Link mode 001 002 003 004 Setting list play mode/Executing list play While All Link is highlighted, press the ENTER/YES keyWhile the unit is stopped, press the List Play Link Mode setting About Stop Mode Viewing linked audio files Locating to the beginning of the play listLocating to the end of the play list Highlight Execute and press the ENTER/YES key Necessary setting RS422 Setup menu Controlling the unit from a video editorBoth Local DVD VideoLynx File data transfer using FTP server function Connecting with a personal computerWhere audio files are stored? FTP client applications Setting example of PC connection Connecting DV824 directly to PCMake TCP/IP setting on the PC Setting of Fetch Connecting DV824 to LAN FTP command detailsIf you use Fetch TCP/IP Setup menu setting IP address settingSub net mask setting Anonymous on/off setting Login name/password settingTCP/IP Enable mode on/off setting Mac address checking File transfer example between the DV824 and a PC Start up the WS FTP applicationClick on OK in the Session Properties dialog box Click on the desired drive Click on the bwf folder Transferring an audio file from the DV824 to the PCTransferring an audio file from the PC to the DV824 Frame rate setting TC generator mode settingRecording time code 24H Run Time code output setting Playing back time codeMenu items which affect time code output Executing jam function Press the ENTER/YES key to execute the jam functionTo exit the jam function, press the EXIT/NO key Selecting auto copy mode Immediately modeBackground mode Select a partition to which audio data is recorded Display now shows the Menu list screen Making auto copy Press the Record key to start recording to the partitionPress the STOP/HOME key to stop recording Making disk copy Disk copy function the optional Model 9057 required Making file copy If you are sure, press the ENTER/YES key After making audio file selection, press the ENTER/YES key Formatting in the DDR mode About mirror disk Use the Menu dial to select DDR and press the ENTER/YES key While Execute is highlighted, press the ENTER/YES key Making dual drive recording Start recording to partition 2 PTO2 Set the chase mode appropriately PreparationsChasing Set the system clock reference to Video When connecting via the USB port Windows XP, Windows Macintosh OSX, OS9.2.1, OS9.2.2Macintosh OS9.2.1, OS9.2.2 Connecting PC to the unit How to unmount the DV824 from the PCExample of copying data to a computer hard disk Example of exporting data to a computer application Click on Convert -, followed by Done indicated by an arrow Computer starts saving the file to the selected file Spot Dialog setting window appears DVD Multitrack Recorder DV824 103 105107 Creating a new ALE file 100About an ALE file 101 While New file is highlighted, press the ENTER/YES keyTape Sets the reel number Tape of an ALE file After making necessary settings, press the EXIT/NO key 102While Video format is highlighted, press the ENTER/YES key Press the ENTER/YES key Adding audio file entries to an ALE file 103While ALL-TAKE.ale is highlighted, press the ENTER/YES key While New entry is highlighted, press the ENTER/YES key How to set Circle Take to a file 104After adding audio file entries, press the EXIT/NO key Viewing and editing audio file entries Viewing audio file entries105 Adding an audio file entry to an existing ALE file Deleting an audio file entry106 Press the EXIT/NO key twice Editing an ALE file Editing an ALE file name107 After completing editing the name, press the ENTER/YES key Remaking an ALE file 108While Remake ALE is highlighted, press the ENTER/YES key Select the desired type and press the ENTER/YES key Deleting an ALE file 109After Remake ALE completes, press the EXIT/NO key Press the ENTER/YES key to delete the file 110 111 About Menu mode 112 SYS Setup menu Menu item Details of settings Default113 Basic procedure for using the SYS Setup menu 114While the unit is stopped, press the ENTER/YES key Example of a menu item which has the second level screen Default file name setting Default file name Selecting the File name modeDefault file name Scene NAME/TAKE Number setting 115 Default track name setting Default track name Next event number setting Next event No116 Recording track setting Record tracks Recording FS/bit length setting Record FS&Bit117 Pull up/down setting Pull Up/Down Maximum file length setting Max file length118 Digital input channel setting Setup digital Input selection Select input119 Analog Digital output signal format selection Digital out Pre recording time setting Pre rec time120 Spdif Auto EE mode selection Auto EE mode Slate tone/pop tone recording mode setting Tone rec modeTone rec time setting Tone rec On/Off setting Peak hold time setting Peak hold Reference level setting Reference levelEnd pop tone On/Off setting 122 Skip mode setting Skip mode Diagnoses file setting diagnosesUSB keyboard type setting Keyboard 123 Startup disk selection Startup disk ROM version checking Version124 Japan TC Setup menu Menu item Setting/function Default125 Both Basic procedure for using the TC Setup menu 126 System clock selection Sync clock TC frame rate selection Frame rate127 Generator mode selection Gen mode Internal TC generator setting Set Gen TC128 Select the Set Gen TC menu item and press the ENTER/YES key 129 Jam mode setting JAM mode User bit setting Gen Ubit130 Default LTC start time setting Default LTC start Time code output source selection Sel.TC Out131 LTC start time editing Edit LTC start 132 Ubit setting of playback time code RepTC Ubit 133Select the RepTC Ubit menu item and press the ENTER/YES key Time code output while paused Rep pause TC Reference time code selection Ref TC sel134 Off Chase mode selection Chase mode 135Once Continue Chase offset setting Chase offset 136Chase offset editing 137 Chase offset trimmingCatch offset Synchronization to a film machine Bi-Phase setup Resetting the current film position to the start timeWhile ResetCounter is highlighted, press the ENTER/YES key 138 Setting the number of pulses per frame Setting the film leader length and film size139 Editing the film start time Disk Utility menu 140 Basic procedure for using the Disk Utility menu 141 Editing a file name Edit file name 142Enter the desired name 143 Viewing file informationViewing descriptor information Select the File Info. menu item and press the ENTER/YES key Line No Contents Details 144 145 Editing descriptor informationAdding descriptor information Deleting descriptor information Deleting an unnecessary audio file Delete file 146Select Delete file and press the ENTER/YES key Press the ENTER/YES again Restoring a deleted audio file Restore Del. file Select Restore Del. file and press the ENTER/YES key147 Optimizing a disk Optimize disk 148 Formatting a disk Format 149Drive selection Volume label setting Format mode selection150 Normal Physical format on/off setting 151 Editing the reel number Volume label Reel No 152Select the Reel No. menu item and press the ENTER/YES key Record protection On/Off setting Rec protect 153 Resume function On/Off setting Resume Partition protection On/Off setting Part. protect154 Load Setup menu 155 Save Setup menu 156User box selection User box name entry Specifications 157 158 159 Physical dimensions 160 Affect of Immunity on This Equipment 161 413760