DVD Multitrack Recorder DV824

Chase mode selection [Chase mode]

Using the "Chase mode" menu item, you can select the chase mode to the reference time code.

<Note>: The "Chase mode" menu item setting is effective only when the optional TC/ SYNC card is installed. When it is not installed, "Void! No TC Card" is shown and you cannot make setting.

Select the "Chase mode" menu item and press the [ENTER/YES] key.

The current mode starts flashing and you can now select the option.

Use the [MENU] dial to select the desired mode, and press the [ENTER/YES] key to confirm your setting. Press the [STOP/HOME] key to exit the MENU mode.

Options

Details

 

 

 

In this mode, once the unit locks to the incoming reference time code after acti-

Once

vating the chase mode, it stops chasing and runs freely, ignoring the incoming

 

time code. The unit does not rechase the time code even if it runs out of sync to

 

the time code (default setting).

 

 

Continue

In this mode, once the unit locks to the incoming time code after activating the

chase mode, it stops chasing and runs freely.

 

 

The unit rechases the incoming time code if it runs out of sync to the time code.

 

 

Frame Sync

In this mode, after the unit locks to the incoming time code, it continues to check

the incoming time code and control the speed to keep locking to the incoming

 

time code by using the small amount of varispeed which is inaudible.

 

The unit rechases the incoming time code if it runs out of sync to the time code.

 

 

To make the unit chase to the reference time code, press the [CHASE] key on the front panel to activate the chase mode.

When activating the chase mode, the [CHASE] indicator starts flashing.

When the unit locks to the reference time code, the [CHASE] indicator is steadily lit.

135

Page 135
Image 135
Fostex DV824 owner manual Chase mode selection Chase mode, 135, Once, Continue, Frame Sync