Fostex owner manual Connecting DV824 to LAN, FTP command details, If you use Fetch

DVD Multitrack Recorder DV824

4)Open the connection with the setting above, and transfer a file.

<If you use WS-FTP>

Before transferring a file, select "Binary" or "Auto" from among "ASCII", "Binary" and "Auto" shown in the center of the window.

<If you use Fetch>

Before transferring a file, set "Mode" to "Auto" and "Format" to "RawData".

Connecting DV824 to LAN

To connect the DV824 to a LAN, use a straight cable to connect the DV824 to a hub. For details about FTP application setting, see "Connecting DV824 directly to PC" de- scribed above.

<Note>: If the IP address or sub net mask is not appropriately set when connecting the DV824 to a LAN, it may give bad influence to the LAN. Consult a network admin- istrator if you need help for setting these items appropriately.

FTP command details

The following shows usable and unusable FTP commands when you can use the DV824 as the FTP server.

<Note>: Only a single user can log in. More than one user cannot log in at the same time.

•The following FTP commands can be used when DV824 works as a FTP server.

USER	Identifying user name.
PASS	Identifying password.
QUIT	Terminating FTP connection. TCP connection
	for Control is also cut off.
	When transferring data, relay the connec-
	tion state open port number for data transfer-
PORT	ring at client side to server.
	Format: PORT IP1, IP2, IP3, IP4, P1, P2
	(IPx: IP address, Px: port number represented
	by decimal number in every 1 byte unit)
TYPE	Designating data type (ASCII, BECIDIC, BI-
	NARY, LOCAL).
RETR	Instructing server to transfer file though data
	connection.
STOR	Instructing server to write data transferred
	through data connection into a new file.
LIST	Requesting server to send a list of files.
NLST	Requesting server to send a detailed list of
	files.
CWD	Changing current directory.
CDUP	Changing current directory to upper level.
PWD	Displaying current directory.
NOOP	Doing nothing.
SYST	Acquire server OS type.

•The following FTP commands cannot be used when DV824 works as a FTP server.

APPE	Instructing server to write data transferred
	through data connection into an existing file
	additionally.
DELE	Deleting designated file.
RNFR	Designating current file name for renaming.
RNTO	Changing current file name for renaming.
HELP	Displaying command description.
ACCT	Identifying user account.
PASV	Opening command state designated port ex-
	cept default data port (No, 20) on server.
STRU	Designating file structure.
MODE	Designating file transfer mode (Stream,
	Block, Compressed).
RMD	Deleting designated directory.
MKD	Creating designated directory.
STAT	Requesting server condition.

75