Specifications and Limitations | IOD150, IOD200, IOD250 |
Limitations:
Must meet the same limitations as the cuber installed on top of it: 50 F. air minimum
100 F. air maximum Must be installed indoors.
Must allow at least
Must allow space for the utility connection at the back. Must have a drain.
Options (Field Installed) | (*Required) |
|
|
| |
*Thermostatic Bin Control Kit (22 Inch Ice Series) | Part Number | ||||
*Thermostatic Bin Control Kit (30 Inch Ice Series) | Part Number | ||||
Manual Water Glass Filler Kit |
| Part Number KWGFID | |||
*Ice Machine Adapters |
|
|
|
| |
| *22 inch cuber |
|
| Part Number KBT15022 | |
| *22 inch machine on a 30 inch dispenser | Part Number KBT25022 | |||
| *30 inch cuber |
|
| Part Number KBT25030 | |
Dispenser Specifications |
|
|
|
| |
Model Number | Storage | Basic |
| Min. Circuit |
|
Capacity (lbs) | Electrical | Actuation | Ampacity | Max. Fuse Size | |
IOD150 | 150 | 115/60/1 | Lever | 3.0 | 15 |
IOD200 | 220 | 115/60/1 | Lever | 3.5 | 15 |
IOD250 | 250 | 115/60/1 | Lever | 3.5 | 15 |
Dimensions (Inches) |
|
|
|
Model Number | Width | Depth | Height (Excludes 4” Legs) |
IOD150 | 22 inches | 30 inches | 35 5/8 inches |
IOD200 | 30 inches | 30 inches | 35 5/8 inches |
IOD250 | 30 inches | 30 inches | 39 5/8 inches |
Note: Counter top 4 inch legs are included with the dispenser.
Ice-O-Matic ice machines are not designed for outdoor installations.
Machine requires voltage indicated on rating nameplate. Failures caused by improper voltage are not considered factory defects. Extended periods of operation at temperatures exceeding limitations constitutes misuse under the terms of the
The IOD150, IOD200 and IOD250 carry a
These dispensers are designed to dispense cubed ice only.
Flaked ice will not work.
The dispenser will agitate for 4 seconds every (1) hour.
Page 2