The iConverter 4Tx 10/100 Ethernet Switch module is a member of the managed iConverter product family. The 4Tx provides a compact 4-Port 10/100 Ethernet switch that is expandable across the iConverter 19-Module, 5-Module and 2-Module chassis backplanes, as well as being supported as a standalone switch with the iConverter 1-Module Chassis.
The iConverter 4Tx UTP ports feature 10/100Mbps, Half or Full-Duplex and auto-negotiation with both hardware and software controls. Hardware control is available for two ports while all four ports are under software control for these features.
RJ-45 crossover support eliminates need for a crossover cable and facilitates connectivity to different types of network equipment. The 4Tx crossover switch is supported on Port 1. Ports 2, 3 and 4 support an automatic crossover detection mode. The 4Tx also features two Ethernet backplane ports to provide connectivity to adjacent modules for network expansion and for in-band connectivity to an iConverter Network Management Module.
4Tx enhanced features include Port VLAN which allows complete control of traffic flow between a module’s ports, and Port Access Control which incorporates remote enabling and disabling of each individual port. The 4Tx supports reporting of MIB statistics that are available for 32 variables per port, reporting
awide range of real-time packet statistics to provide performance and operational monitoring.
iConverter 4Tx modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter 4Tx Managed Ethernet Switch supports 10BASE-T or 100BASE-TX on four UTP ports
Enhanced features include Port VLAN, Port Access Control and MIB Statistics
Multiple 4Tx modules can be installed to expand the port concentration in a single chassis
Supports Half or Full-Duplex and auto-negotiation
RJ-45 crossover support eliminates need for different cables in connecting to various devices
Ethernet backplane ports for connectivity to adjacent modules
Management is available with the addition of a management module to the chassis
SNMP management via NetOutlook™ provides real-time port and module information, remote parameter configuration and trap notification
Conforms to IEEE 802.3, 10BASE-T and 100BASE-TX specifications
Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
Lifetime Warranty and free 24/7 Technical Support
