Setting the personal data before taking a measurement

Disposal of used batteries should be carried out in accordance with the national regulations for the disposal of batteries.

As the batteries may leak and damage the main unit, please note the following points:

•Remove the batteries from this unit when you are not going to use it for a long period of time (approximately three months or more).

•Replace the worn batteries with new ones immediately.

•Do not use manganese and alkaline batteries together.

•Do not use new and worn batteries together.

3.3 Setting the personal data before taking a measurement

Step 1: Push the O/ I button.

All the display segments turn on

Step 2: Push the Set button to enter the setting mode.

BODY FAT MONITOR BF306

Step 3: Setting height (range: 100.0 cm to 199.5 cm).

1. The height value 160.0 cm flashes and HEIGHT is indicated.

2. Push the ▼/▲ button to set the height value. The height value increases by increments of 0.5 cm each time the

▲button is pressed or decreases

each time the ▼ button is pressed. By pushing the button for more than 1 second, the height values change at a faster rate.

3.Push the Set button to set the height value. The display changes to the weight setting screen.

Step 4: Setting weight (range: 10.0 kg to 199.8 kg).

1.	The weight value 60 kg flashes and
	WEIGHT is indicated.
2.	Push the ▼/▲ button to change the
	weight value. The weight value
	increments by 0.2 kg each time the

▲ button is pressed or decreases each time the ▼ button is pressed. By holding the button for more than 1 second, the weight values change at a faster rate.

3.Push the Set button to set the weight value. The display changes to the age setting screen.

Step 5: Setting age (range: 18 to 70 years old).

1.	The age value 40 flashes and the
	AGE is indicated.
2.	Push the ▼/▲ button to change the
	age. The age values change by 1 year.
	By holding the button for more than
	1 second, the age values change at a faster rate.

3.Push the Set button to set the age value. The display changes to the gender setting screen.

Step 6: Setting gender (male/ female).

1. The gender male flashes and MALE is indicated.

2. Push the ▼/▲ button to change the gender. The display of male or female flashes alternately.

3. Push the Set button to set the gender.

English

Now all the set items are stored, is displayed.

Step 7

Continue with the next paragraph: to carry out the measure- ment, paragraph 3.4.

3.4 To take a measurement

Step1: Stand with both feet slightly apart.

Step 2: Hold the grip electrodes. Wrap your middle finger around the groove of the handle. Place the palm of your hand on the top and the bottom electrodes. Put your thumbs up, resting on top of the unit.

Step 3: Hold your arms straight out, at a 90 degree angle to your body. Do not move during the measurement.

Step 4: Confirm the ready to measure display.

The indicator turns on.

Step 5: Push the START button.

The display turns on.

Step 6: Immediately after having pushed the Start button, hold the electrodes correctly with both hands as shown on the right. The unit automatically detects that it is held and starts measuring.

Step 7:

During measuring, the display shown to the right turns on and the arrows rotate from LOW to TOO HIGH.

As soon as measurement is finished the FAT% is displayed on the left display, while indicating the interpretation of this value (NORMAL >> TOO HIGH) on the right display. After approx. 5 seconds, both displays change to BMI (Body Mass Index).

Every 5 seconds, the displays change from FAT% to BMI and vice-versa.

You can start another measurement

when the indicator turns on.

For an explanation how to interpret the measurement results in detail, please

refer to chapter 4.	BODY FAT MONITOR BF306

Step 8: Push the O/I button to turn the power off.

If you do not push the O/I button, the unit will turn off automatically, approximately three minutes after displaying the measurement results.