“Clr” will appear in the display and the registered information is deleted from memory. Note: The stored results for the previous measurement will also be deleted.
The age setting appears on the display and the age setting blinks.
4.Setting and Adjusting Personal Data
2.Press the SET button to confirm your selection.
3.Press the SET button.
The age setting appears on the display and the age setting blinks.
4.Adjust the information for your age, gender, and/or height.
Press the 
and 
buttons to adjust the settings for each category and then press the SET button to confirm each setting.
Then you can now start taking measurements. (Process to Step 3 in “5.1 Taking a Measurement” on page 15.)
Delete a Personal ID Number
1.Repeat steps 1 to 2 in section “4. Setting and Adjusting Personal Data” on page 11.
2.Press the SET button to confirm your selection.
3.Press the SET button.
4.Press the GUEST/MEMORY button for two seconds.
EN
13
