Omron BF400 Using the Unit, Taking a Measurement, Select Personal ID or Guest mode

5.Using the Unit

5. Using the Unit

5.1Taking a Measurement

1.Push the power switch to turn on the unit.

“CAL” blinks on the display, then the display changes to 0.0 kg. Wait until 0.0 kg appears on the display.

2.Select Personal ID or Guest mode.

If you have a personal profile (Personal ID) registered on the unit:

1.Press the USER

button until the ID number for the personal ID containing your personal profile blinks on the display.

Notes:

•If an error occurred for the body fat percentage measurement during the previous measurement, “– – –”will be displayed for %FAT.

•If you want to check

the last

measurement results, press the

GUEST/MEMORY button while your personal profile blinks on the

display. The memory indicator is displayed. After you check the last measurement results (refer to p. 15), push the power switch to turn off the unit.

2.Press the SET button.

“CAL” blinks on the display, then the display changes to 0.0 kg.

Wait until 0.0 kg appears on the display.

If you do not have a personal profile registered on the unit (Guest mode):

1.Press the GUEST/MEMORY button.

The GUEST indicator appears on the display and the age setting blinks.

2.Enter the information for your age, gender and height. (Step 4 in “4. Setting and Adjusting Personal Data” on page 12)

Press the or buttons to adjust the settings for each category and then press the SET button to confirm each setting.

After you confirm the setting for height, the unit displays the settings for all three settings then 0.0 kg appears on the display.

14