Nomenclature
Front Panel Rotary Switches
Used to set the node address when functioning as a DeviceNet slave.
Front Panel DIP Switch
Used to copy (backup) parameters between the Temperature Controllers and DeviceNet.
UP/DN (Pin 2): Sets the copy operationmode (i.e., upload or download).
COPY (Pin 1): Starts the copying.
DeviceNet Connector
Connects to DeviceNet communications cables. Power for DeviceNet communica- tions is also supplied though this connector. An
⋅10 | MS | |
NODE |
| |
ADR | NS | |
⋅1 | ||
| ||
ON |
| |
UP/DN | TS | |
| ||
COPY |
|
Indicators
BCDE | ||
A | F | |
89 |
| 0 |
6 | 1 | |
2 | ||
7 |
| |
543 | ||
Back Panel DIP Switch
Used to specify whether the connection configuration and I/O allocation is set using simple I/O allocation or Configurator I/O allocation.
Pin 1: I/O allocation setting switch
Pin 2: Not used (Set to OFF.)
Back Panel Rotary Switch
Used to set the maximum unit number when simple I/O allocation is used.
Terminal Unit Connector
Connects to the
Terminal Unit.
Dimensions
Note: All units are in millimeters unless otherwise indicated.
130 |
4.7 |
30 |
Dimensions when Mounted to the
72.8
89.6
(107.5)
27 
35
46
Note: Be sure to read the precautions for correct use and other precautions in the following user’s manuals before using the Communications Unit.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
http://www.ia.omron.com/ | (c)Copyright OMRON Corporation 2007 All Rights Reserved. | 5 |
| ||
|
|
|
